Professional Documents
Culture Documents
LIGHTNING PROTECTION SYSTEM (As per IS/IEC 62305 & NBC 2016)
PROJECT: 13.7 MW Solar plant Bhatinda ,Punjab
1.0
Air Termination Network:
Supply of single spike air terminals of 10 mm dia. & 1000 mm length as required and as per site conditions. The
air terminal shall be manufactured with aluminium & shall be as per IEC 62561-2. The air terminal shall be fixed
with clamping arrangement of 2- Z and MV clamp.
1.1(a) Nos. 165 390 64350
Make: JMV
Supply of single spike air terminals of 10 mm dia. & 1000 mm length as required and as per site conditions. The
air terminal shall be manufactured with aluminium & shall be as per IEC 62561-2. The air terminal shall be fixed
with clamping arrangement.
1.1(b) Nos. 84 385 32340
Make: JMV
1.2 Roof Conductor for interconnecting Air terminal : Supply of 8 mm dia aluminium round conductor for air
termination network at terrace level (metallic shed) and shall meet the requirement of IEC 62561-2.
Mtr. 5844 58 338952
Make: JMV
Supply of Roof conductor holder for holding 8 mm dia. round conductor (for metallic Roof). The conductor
holder should be installed at every 1 mtr. The conductor holder shall be made with SS sloted Z clamp & as per IEC
62561-4
1.3 Nos. 4519 130 587470
Make: JMV
Supply of Roof Conductor holder for holding of 8 mm dia. round conductor (for RCC). The conductor holder
shall be mounted on plastic base support and shall meet the requirements of IEC 62561-4.It should be installed at
every 1 mtr.
1.3() Nos. 168 80 13440
Make: JMV
Supply of Roof Conductor holder for holding of 8 mm dia. round conductor (for RCC roof). The conductor
holder shall be fixed on plastic support weighed by concrete block. It shall meet the requirements of IEC 62561-4
and should be installed at every 1 mtr.
1.4 Nos. 1157 80 92560
Make: JMV
Bridging cable: Supply of 16sq.mm. copper cable along with lugs, having 500mm length & as per IEC 62561-1
so as to connect air termination rod with any metallic structure on the roof.
1.4 Nos. 525 120 63000
Make: JMV
Supply of Universal Connector for making straight, Tee & Cross joint of 8 mm Aluminium Conductor to 8 mm dia
Aluminium conductor on parapet wall, roof and vertical facade of masonery / glass / metallic work.
1.5 Make: JMV
Nos. 1304 110 143440
Supply of 8 mm dia aluminium round conductor for Down conductors to be installed on vertical wall, façade of
masonary / glass / metalic work. It shall meet the requirements of IEC 62561-2. 10608 58 615264
2.1 Mtr.
Make: JMV
Supply of Wall Conductor holder for holding of 8 mm dia. round conductor (for RCC wall). The conductor
holder shall be mounted on plastic base support and shall meet the requirements of IEC 62561-4.It should be
2.1(a) installed at every 1 mtr. Nos. 3047 80 243760
Make: JMV
Supply of Roof conductor holder for holding 8 mm dia. round conductor (for metallic side walls). The conductor
holder should be installed at every 1 mtr. The conductor holder shall be made with SS sloted Z clamp & as per IEC
62561-4
2.2(b) Make: JMV Nos. 7561 130 982930
Note: Holders can change as per site condtion.
Supply of Test Clamp to disconnect the down conductor from the earth termination network for regular checks of
the earth termination resistance value. (with enclosure). It shall meet the requirements of IEC 62561-2.
2.3 Make: JMV Nos. 525 750 393750
Supply of Expansion piece made of 8mm dia. Aluminium & as per IEC 62561-2 along with suitable connecting
accessory. It shall be installed at every 20 mtr to maintain the flexibility to the conductor due to heat.
2.6 Make: JMV Nos. 708 245 173460
Supply of Lightning Strike counter Model: JMV 7D for counting the number of lightning strikes without any power
supply. The Counter should be mounted on the Down Conductor. The Lightning Counter should be IP 68 rated
2.7 enclosure suitable for external application. Nos. 7 4415 30905
Make: JMV
Supply of 25 x 3mm GI strip Conductor laid below the ground, as Required and as per specification and code of
practice with Tee and Straight joint with SS strip connector. Make: JMV
3.2 Mtr. 7036
Supply of DMC Holder For 25x3 GI Strip, as Required and as per specification and code of practice.
Make: JMV
3.3 Nos. 1106 55 60830
Supply of cross connector for making T joint between 25 x 3mm GI strip to 25 x 3mm GI strip below the ground
level.
3.4 Make: JMV Nos. 553 225 124425
5226370
This is the tentative BOQ. The quantity can be changed as per the site conditions & design.
Hope you find the above in order. Should you desire any further information / Clarification please feel free to contact.
Thanking you and looking forward for your valuable order
Vandana