Professional Documents
Culture Documents
Each employee should be provided training on the safe and proper use of
the most important, primary tool their bodies (Strong, Alert, Focused,
Muscle strains, pulls and repetitive motion
Energetic, or SAFE training). Proper techniques of stretching, lifting,
injuries.
bending, moving, rolling rocks, securing good footing, the importance of
good nutrition and hydration.
Each employee will be given time on the job to properly stretch and warm-up
before and during physical activity for a period of time deemed appropriate
by the crew leader, or on-site supervisor.
Employees will be encouraged to switch hands often and vary the types of
activities performed to limit exposure to repetitive motion injuries.
Each employee should be provided training on the safe and proper use of
the most important, primary tool their bodies (Strong, Alert, Focused,
Muscle strains, pulls and repetitive motion
Moving materials. Energetic, or SAFE training). Proper techniques of stretching, lifting,
injuries.
bending, moving, rolling rocks, securing good footing, the importance of
good nutrition and hydration,
Employees will be encouraged to switch hands often and vary the types of
activities performed to limit exposure to repetitive motion injuries.
Injuries resulting from lack of Crew leaders will conduct, whenever appropriate, tailgate safety talks to
communication, or miscommunication. provide orientation, discuss project, safety concerns, assign wor
Instructions should come from one person when working in teams of two or
more
Vehicle or machinery damage, operator Patos must be needed prior to start the work activities.
Moving materials with machinery injury, or injury to others working around Proper training of all workers involved to activity should be
machinery. required. Check list of machiner of equipment must be provided.
Patos must be needed prior to start the work activities.
Injury or death caused by dropped,
Proper training of all workers involved to activity should be
shifting, or swinging loads
required. Check list of machiner of equipment must be provided.
Assigned spotter of flagmen to all curv/blind spot.
full time supervisor of Foreman, Engineer and Safety Officer.
Clear the route of hazards and debris before moving materials.
Fill holes, build temporary structures, and explore options to maximize safety
and efficiency in moving materials, especially on steep or loose slopes.
Insufficient lighting,Walk into objects, Effective illumination of the working areas including enclosed ones and
slips, trips, fall & other injuries basement Removing materials from access paths
Good housekeeping
Access ways free from debris and materials
Poor Access Adequate access for the workforce
Trailing cable removed from access ways and routed properly
3. Stripping Columns Props not adequately secured, A crow Patos must be needed prior to start the work activities.
below Prop falls over hitting workforce Proper training of all workers involved to activity should be
required. Check list of machiner of equipment must be provided.
Props to be secured adequately.
Props to be effectively laced/tied in.
Adequate Monitoring
Sufficient lighting in place.
Protruding Column Clamps ,Walk into colu
Proper PPE to be worn by the personnel working.
Be aware of possible stored energy in the formwork
Stored energy/Pinch points panels
Use long pry bar and force gently on formwork
Pay attention to your surroundings.
Slips, trips and fall Remove braces from walkway at first
Store material neat and tidy as you strip
Puncture and laceration from scrap wood, Remove or bend nails as you go
nails Grip material in one location. Do not run your hand along
and screws left behind lumber.
Use proper lifting technique
Muscle strains
Ask for assistance to lift if require.
5. Lifting works using Patos must be needed prior to start the work activities.
Loading and unloading
of mobile and tower Load falling: Proper training of all workers involved to activity should be
materials required. Check list of machiner of equipment must be provided.
crane
securing and properly bracing structures securing loose material such as
plywood, iron sheets and off-cuts against the wind using chutes when
placing debris into a skip below the work area erecting perimeter
containment screens
Make sure the lifting area has been isolated with appropriate siagnes. Patos
Unauthorize entry / Toolbox meeting to all workers on the site must be prior to start the activity
ti be aware to the work activity.
Full time supervisor of Foreman, Engineer and Safety Officer while doing the
lifting works activity.
Proper observation to the working place, eliminate all abstacles ath the area,
Strip,slip and fall house keeping must be prior to start the work activity. Make sure the lifting
belt/chain are in good condition and 100% tied in to the materials being lift.
This might include putting sensors on equipment that cause it to cut out if
Hitting and crushing
workers are detected in the area
Avoid workers from entering certain places by using barriers and warning
signs.
provide detailed, step-by-step instructions to workers on how to use the
item/equipment safely.
Ensure that they know where to stand when using equipment controls, to
avoid coming into contact with machinery
full time supervisor of Foreman, Engineer and Safety Officer.
Reactive maintenance
full time supervisor of Foreman, Engineer and Safety Officer.
Daily proper inspection of tower crane and mobile crane prior to start the
work activity.
make sure the equipment is over all tested with 3rd party inspection prior to
use.
Use of proper and appropriate equipment checklist daily with signed of crane
oerator and supervisor.
Patos must be needed prior to start the work activities.
Human error Proper training of all workers involved to activity should be
required. Check list of machiner of equipment must be provided.
Trained and experienced people are assigned for the task. Assigned a
inspector to over see the possible iminent danger.
The PPE required for any material handling tasks are: Safety glasses,
appropriate gloves and appropriate non slip footwear. Additional PPE may
be required depending upon environment conditions.
Nothing follows