Professional Documents
Culture Documents
com
1.a) Explain in how many ways the programmable interconnections between the
configurable logic blocks and I/O blocks can be made.
b) What is a registered output in PAL devices?
2.a) How many inputs can a look up table accept in an Altera FLEX 10K logic
element? How can this be expanded?
b) What is meant by “a device is in-system programmable?”
i)
ii)
EPM7032
EPM7064 D
Out of the given CPLD’s list the in-system Programmable devices.
L
3.
iii)
iv)
EPM7128 S
EPM 7160 S
O R
Given f (T , U , V , W , X , Y ) = VWX + UVWY + TVWY . Show how ‘f’ can be
4.
U W
realized using a single 4000 series, logic cell.
The SM charts for three linked machines are given below. All state changes occur
T
during the falling edge of a common clock. Complete a timing chart including ST,
Wa, A, B, C and D. All state machines start in the state with an asterisic (*)
N
J
www.jntuworld.com
www.jntuworld.com
5. Draw an ASM chart for a binary multiplier. Design the control logic using one-
hot design.
6. Design a digital system that converts an 8 bit signed integer to a floating point
number. Use non-registered PCDs.
******
L D
O R
U W
N T
J
www.jntuworld.com