You are on page 1of 3

Project Name :-

Contractor :-
Client :-
Consultant :-
CHECKLIST FOR VITRIFIED FLOORING
Block :- Date :-
Unit No / Location :- Floor :-
Ref Dwg No. :
Sl Description Required Actual Conformity Remarks
No. (Checked by (Random
Contractor) Sampling by
C&W/ Client)
PRE INSTALLATION CHECKLIST
1 Dimension & Surface Quality
a Length and widlh Should be as per Table-12 of Verified & Found YES / NO
IS:15622 OK / NOT OK

b Thickness Should be as per Table-12 of Verified & Found YES / NO


IS:15622 OK / NOT OK

c Straightness of sides (Facial sides) Should be as per Table-12 of Verified & Found YES / NO
IS:15622 OK / NOT OK

d Rectangularity Should be as per Table-12 of Verified & Found YES / NO


IS:15622 OK / NOT OK
2 Surface Flatness
a Centre Curvature Should be as per Table-12 of Verified & Found YES / NO
IS:15622 OK / NOT OK
b Edge Curvature Should be as per Table-12 of Verified & Found YES / NO
IS:15622 OK / NOT OK
3 Surface Quality Verified & Found YES / NO
OK / NOT OK
4 Brand & Shade of Tiles As Approved / As per Customer's Verified & Found YES / NO
choice OK / NOT OK
5 Manufacturing Date and Batch No. Verified & Found YES / NO
OK / NOT OK
6 Other visual defects in Appearance Tiles should be free from Blisters, Verified & Found YES / NO
Crazing, Chips, Welts and Crawling OK / NOT OK

7 Check customer choice tile list for every room Verified & Found YES / NO
is in place. OK / NOT OK
8 Check the room dimension from plaster finish Verified & Found YES / NO
to adjust the residual tiles OK / NOT OK
10 Check for finished floor levels to be maintained Finished floor levels and drop in Verified & Found YES / NO
with corridor and lift lobby Balcony, Toilets, Corridor etc. should OK / NOT OK
be as per drawing
11 Check the level of the Balcony spouts & slope Slope should be provided as per Verified & Found YES / NO
drawing OK / NOT OK
12 Base Surface preparation:Check the thorough The base should be cleaned Verified & Found YES / NO
hacking & chipping of floors thoroughly and wetted. OK / NOT OK
14 Check for grid pattern / layout of floor tiles as Should be as per approved Verified & Found YES / NO
per drawing/ through dry mock up scheme/drawing/as approved by OK / NOT OK
Architect.
15 Availability of required tools, m/c etc. Should be available at site Verified & Found YES / NO
OK / NOT OK

Page 1
Project Name :-
Contractor :-
Client :-
Consultant :-
CHECKLIST FOR VITRIFIED FLOORING
Block :- Date :-
Unit No / Location :- Floor :-
Ref Dwg No. :
Sl Description Required Actual Conformity Remarks
No. (Checked by (Random
Contractor) Sampling by
C&W/ Client)
DURING INSTALLATION CHECKLIST
1 Check for Proper Cutting of Tiles as and where Verified & Found YES / NO
required with proper machineries before fixing. OK / NOT OK

2 Application of cement slurry over the concrete Cement Slurry should be applied Verified & Found YES / NO
surface over the the concrete surface OK / NOT OK
before laying of underbed mortar
to ensure proper bonding
3 Thickness of base mortar (C:M-1:4) Average thickness should be 40mm Verified & Found YES / NO
- to be ensured by level pads (surface of Base and at any place it should be 15mm OK / NOT OK
slab to be chieselled for maintaining minimum (min.)
thickness of base mortar wherever required)

4 Thickness of base mortar (C:M-1:3) for Average thickness should be 12mm. Verified & Found YES / NO
Skirting. OK / NOT OK
5 Application of cement slurry of honey like Should be applied @ 3.3 Kg Verified & Found YES / NO
consistancy cement/Sqm over 1 Sqm area of OK / NOT OK
mortar bed
6 Fixing of Tiles Tiles should be washed clean, fixed Verified & Found YES / NO
in the slurry and gently tapped with OK / NOT OK
wooden mallet and brought to level
with adjoining tiles.

7 Thickness of joint Should not be more than 1 mm Verified & Found YES / NO
OK / NOT OK

8 Consistency and consolidation of the bed No HOLLOW sound should be heard Verified & Found YES / NO
mortar OK / NOT OK

9 Top surface of the Tiles Surface of the flooring to be Verified & Found YES / NO
frequently checked during laying OK / NOT OK
with a Straight Edge 2.0m long.
10 Cleaning of Joints and grouting the joints with The joints must be cleaned to a Verified & Found YES / NO
approved Polymer modified Cementatious grout depth of 2 to 3mm with wire brush / OK / NOT OK
(Bal Endura / Laticrete or Equivalent) matching trowel and joints to be flush pointed
the shade of respective Tiles. with white cement added with
pigment to match the colour of tiles.

11 Insertion of the floor tiles into the skirting 10 mm Minimum Verified & Found YES / NO
OK / NOT OK
12 Check for 100mm high Skirting Skirting should be perpendicular with Verified & Found YES / NO
floor tiles. The projection of skirting OK / NOT OK
must be equal throughout the length
of the walls in all the Rooms. Corner
joints of the skirting should be in
right angle
POST INSTALLATION CHECKLIST
l Curing Should be done for 7 days Verified & Found YES / NO
OK / NOT OK
2 Joints of floor & skirting tiles All the joints are properly aligned
and straight
3 Cleaning and Drying Floor should be wiped with a moist Verified & Found YES / NO
rag, dried with a soft cloth and OK / NOT OK
finished clean
4 Edges of adjacent tiles All the edges should be in same level Verified & Found YES / NO
OK / NOT OK

5 Undulation & misalignment in tile layout at Max.2mm & no stagnation of water Verified & Found YES / NO
joints seen. OK / NOT OK

6 Cracks & dents No cracks/dents are acceptable Verified & Found YES / NO
OK / NOT OK

7 Protection of the flooring Protection of the flooring should be Verified & Found YES / NO
done by placing plastic sheet over OK / NOT OK
the floor with POP
8 Others (if any) Verified & Found YES / NO
OK / NOT OK
REMARKS: Approved for next stage of work / Not Approved
Note : Please record the quantities overleaf or in Joint Measurement Sheet

Page 2
Project Name :-
Contractor :-
Client :-
Consultant :-
CHECKLIST FOR VITRIFIED FLOORING
Block :- Date :-
Unit No / Location :- Floor :-
Ref Dwg No. :
Sl Description Required Actual Conformity Remarks
No. (Checked by (Random
Contractor) Sampling by
C&W/ Client)

Site Engineer Approved by

Page 3

You might also like