You are on page 1of 2

• Describe yourself?

• What are the tasks do you perform as field operator? compile just tell the tasks of your updated CV.
• Describe your process from beginning to the end (to check your English language and communication
skills).
• Describe any process problems you are facing and what are the solutions?
• Work management system of your company?
• What’s a temporary defeat Certificate?
• Zero energy demonstration to the permit holder?
• Confined space?
• Double block and bleed, isolation types.
• Positive isolation.
• N2 purging.
• O2 freeing.
• What is a cryogenic process
• What is mean by the JT or Joule-Thomson effect
• Can you name a typical process refrigerant?
• What do you understand by the term reflux?
• What is the causes of foaming in the amine absorber?
• What is molecular sieves used for?
• What is the purpose of steam trap?
• What do understand by interface level?
• What is the purpose of anti-surge?
• What do you understand by the term muster and muster point?
• Which direction would you normally move to when there is a toxic gas leak?
• What does SCBA stands for?
• What is TLV (threshold limit value? For hydrogen sulfide) H2S?
• Who is responsible for your safety?
• Who is responsible for unit housekeeping and clean up?
• How to do you say that equipment is positively isolated and depressurized prior to handing over to
maintenance.
• What is typically used to purge equipment from hydrocarbon?
• What are the supplied streams to utility station?
• What do you understand by the term a confined space?
• What is the difference between the spectacle blind and slip plate?
• What do you understand by the term temporary defeat?
• JSA is an acronym for?
• When do you consider a maintenance activity is completed? Permit is closed.
• When would you required to perform a pressure test on process equipment (leak test)?
• Who checks the confined space before entry?
• How to do you isolated a vessel for a confined space entry (steps)?
• You are starting up a clod steam and suddenly you heard abnormal knocking noise so what’s your
action?
• What would you immediately response be if you were walking through the plant and you observe a
serious hydrocarbon leak from high pressure process equipment?
• When would you use a written and approval plant operating procedures?
• When you are supervising a hot work job in the area, when should a gas test be performed?
• What actions would you like to take when a fire detection system in your area of responsibility
needed to be temporary disabled?
• In case of gas leak, check wind direction and cross up wind to the nearest master point
• Master point?
• H2S?
• What is P&ID and what’s PFD?
• Normal steps of pump start up
• What’s the main compounds of a centrifugal pumps? MPSH?
• What is cavitation
• What is a compressor
• What is surging of a centrifugal compressor.
• What’s a JSA?
• What’s SIMOPS?
• Hazardous areas classification?
• What’s a BA (breathing apparatus)?
• What’s a cryogenic process?
• Gas turbine?
• Control loops and process parameters.
• LEL and TLV?

You might also like