Professional Documents
Culture Documents
Sonaja Robot Amigurumi
Sonaja Robot Amigurumi
Crochet pattern
“Robot rattle”
Design by Inna Chybinova
Instagram: https://www.instagram.com/inna_chi_hm/
This pattern is my own original design.
1
PLEASE, DO NOT COPY, SHARE, TRANSLATE, MAKE VIDEO LESSONS OR DISTRIBUTE PATTERN OR ANY ITS PARTS!!!!
This pattern is for personal use only.
You may sell the finished items.
Feel free to post and share pictures of your finished items but please credit @inna_chi_hm as the designer.
This crochet pattern does not contain crochet lessons.
You need to have basic crochet skills to finish the pattern!
If you have any trouble following the pattern, feel free to contact me directly from the shop.
Final size of the rattle with the recommended materials and tools ~ 14 cm/5.51”.
Use any materials and tools you like, but the final size of your toy may differ.
©January 2024 Inna Chybinova (@inna_chi_hm). All rights reserved.
2
Suggested substitute yarn:
Abbreviations: “Alize Bahar”
Fine weight yarn. “Alpina Anabel”
st / sts = stitch / stitches
Number 2 in Standard Yarn Weight “Ice Yarns Camilla Cotton”
ch = chain stitch System (SPORT, BABY). “Schachenmayr Catania”
sc = single crochet I used Sport (5 ply) cotton yarn. “Phildar Phil Cotton 3”
slst = slip stitch
“Patons Grace”
inc = increase (2 single crochets in one stitch)
“Gazzal Giza”
dec = invisible decrease (2 stitches together working on front loops only)
“
sc3tog = triple (invisible) decrease
hdc = half double crochet
hdc inc = half double crochet increase (2 half double crochets in one stitch) ❖ Toy is crocheted in continuous spirals without joining the
FLO = Front loop only rounds, do not turn or slip stitch unless otherwise stated in
BLO = Back loop only the pattern!
(…) = repeat between () number of times indicated ❖ You can use a scrap of contrasting yarn instead of the stitch
[…] = total number of stitches in the round or row marker!
©January 2024 Inna Chybinova (@inna_chi_hm). All rights reserved.
Head: 1 2 3
Antenna: 22 23 24
Body part:
Working in rows. Using Scheepjes Catona (Light silver) #172.
Start with foundation chain. Note that you may need to increase or decrease the number of rows to match your
34
wooden ring. It should `hug` wooden ring completely.
Row 1. 25 ch [25]
Row 2. Start in the 2nd chain from the hook: 24 sc, ch 1 and turn [24]
Rows 3-11. 24 sc, ch 1 and turn [24] - 9 rows
6
Row 12. 24 sc [24] – 1 row
Fasten off and leave long thread for sewing Image 34.
Collar:
Working in rounds. Using Scheepjes Catona (Bridal white) #105. Before making MAGIC RING, leave a thread about 20 cm long. With its help we will sew the collar!
Rnd 1. 40 sc in MR [40]
35 36
Rnd 2. (hdc inc) * 40 times [80]
Rnds 3-4. 80 hdc [80] – 2 rounds
Finish the round in an invisible way!
When you are finished, weave in the yarn end.
Video tutorial: https://youtu.be/uME-EULGHoo
©January 2024 Inna Chybinova (@inna_chi_hm). All rights reserved.
37 38 39
Attach the yarn (Metal grey) #242 insert your hook and work slst
along the edge of the collar Images 40-44. Weave in the yarn 40 41 42
ends along the slst stitches Image 45.
Front side is
facing you
Thread we left at
43 44 45 the beginning 46
©January 2024 Inna Chybinova (@inna_chi_hm). All rights reserved.
Assembling: 47 48
Sculpting!
Take the same yarn we crocheted the head and long
needle! 3 2
Insert the needle with a long piece of yarn in point 1
(bottom of the head Image 47). Leave there a long
piece of yarn (8-10 cm). Pull out the needle from point
2, insert the needle in the point 3, pull out from point
1. Pull well both of threads and tie them tightly Image
1
49. Repeat sculpting with another eye! Cut and weave in the yarn ends inside the head.
49 50
Using Scheepjes Catona (Metal grey) #242 embroider the nose. Work 3-4 horizontal stitches between the eyes 1 sc wide Images 51,52. Weave in the yarn end.
51 52
©January 2024 Inna Chybinova (@inna_chi_hm). All rights reserved.
Using 6 strands of white embroidery floss embroider 53 54
the highlights as shown on Image 53! Weave in the
ends!
Sew antenna to the head`s top, for sewing insert needle in the back loops Image 58! Stuff the bottom slightly before finishing. Weave in the ends.
57 58 59 60
©January 2024 Inna Chybinova (@inna_chi_hm). All rights reserved.
Sew the ears onto either side of the head between 61 62
rounds 11 and 16 (count from the head`s top) Image
61. For sewing insert needle in the back loops Image
62. Weave in the yarn ends.
63 64 65
10
Sew the body part around the wooden ring. Weave in the yarn end Images 66,67!
66 67
©January 2024 Inna Chybinova (@inna_chi_hm). All rights reserved.
Attach the collar to the head as shown on the pictures. 68 You can use threads 69
Attach the head to the ring. And sew it, firmly as you to mark the area of
can, so it doesn’t move when shaking. sewing on the ring
Weave in the yarn end.
Video tutorial: https://youtu.be/OJ50yr5jHcw
70 71 72
11
Pull the yarn end of the collar to tighten it around the head. Make a few stitches to fixate it. Weave in the yarn 73
end.
Video tutorial: https://youtu.be/lkUHnqXDJO8
©January 2024 Inna Chybinova (@inna_chi_hm). All rights reserved.
12