1. Free access to the workshop areas is restricted to authorised
personnel only. No other person may enter the workshop without permission. 2. Do not operate any item of equipment unless you are familiar with its operation and have been authorised to operate it. If you have any question regarding the use of equipment ask the area supervisor. 3. No welding may be undertaken unless the area supervisor is satisfied that the person is capable of doing so safely. 4. During any welding operation the welding fume extractor (Fans) must be used. 5. Personal Protective Equipment is provided; overall, safety shoes, hand gloves, Apron are to be worn all the time. Safety glasses/goggles must be used where necessary. Long hair must be tied back or completely covered to keep it away from moving part of the machinery. Do not wear ties, loose clothing 6. Tools and equipment’s must not be removed from the welding shop without the permission of the area supervisor. 7. Do not carry loads such that the weight may be dangerous or vision obscured. Get help in lifting or moving any heavy objects. 8. Report any defective equipment /tools to the area supervisor. 9. Eating and drinking in workshop areas is strictly prohibited. 10. Never indulge in horseplay in the shop areas. Running in the workshop is strictly prohibited 11. Report all electrical and mechanical faults of machines immediately. 12. Materials that catch fire easily should be store away 13. Check for inflammable gas leaks before you start working in the workshop 14. Use equipment’s and tools for their intended purposes. 15. Equipment must be cleaned after use. Any materials, tools or equipment used must be tidied away. 16. In case of injury, no matter how slight, report it to the shop supervisor. 17. In case of fire, do not panic. Give an alarm and leave the room orderly as instructed by area supervisor.
CONTACT PERSON: MR. JOHN AMUPADHI, CELL:0812723840