Professional Documents
Culture Documents
Est110 (Ece) 02.05.2024 Engineering Graphics QP
Est110 (Ece) 02.05.2024 Engineering Graphics QP
PSO
Mark
CO
PO
BL
PART - A
Answer Any 2 Full Questions (20 marks)
1 A cone of base 40 mm diameter and axis 70 mm long has one of its
generators on the HP. A plane containing that generator and the axis is
10 3 1 1 1
perpendicular to HP and inclined at 45° to the VP. Draw its projections
when the base is nearer to VP than the vertex.
2 A cone base 75 mm diameter and axis 75 mm long has its axis parallel to
VP and inclined at 45° to HP. A horizontal section plane cuts the cone
10 3 2 1 2
through the mid-point of the axis. Draw the front view and sectional top
view.
PART – B
Answer Any 2 Full Questions (20 marks)
4 A vertical cylinder of 75 mm diameter and 95 mm height is cut by a
section plane perpendicular to VP and inclined at 450 to the axis and
10 4 1 1 1
passes through the left end of the horizontal diameter of the top face.
Draw the development of the lateral surface of the truncated cylinder.
10 5 2 1 2