Professional Documents
Culture Documents
Project Presentation– 18MEP78 on
Submitted by
ABHISHEK AP 1DB20ME001
CHARAN S 1DB20ME002
TEJAS M 1DB20ME004
ADITHYA SAI RAM KN 1DB20ME400
FABRICATION OF PEDAL
POWERED WATER PURIFIER
CONTENT
SL NO CHAPTER
1 INTRODUCTION
2 LITRATURE SURVEY
3 AIM
4 OBJECTIVES
5 METHODOLOGY
6 MATERIALS
7 ADVANTAGES
INTRODUCTION
Water purification is the process of removing undesirable chemicals,
biological contaminants, suspended solids and gases from water. The
goal is to produce water fit for a specific purpose. Most water is
disinfected for human consumption.
Betzabe Gonzalez et. al (2014) has studied on the design and he used peristaltic
pump with silicone tubing.
Yuichi katsuara et. al (2011) president of Nippon basic company was the first
company to give Portable Water Purifying System “Cycloclean” powered by
pedaling bicycle to make 5 liter(max.) of clean water in a minute at a technology
fair in Tokyo.
A. Peramanan et. al (2014) has studied the fabrication of Human Power Reverse
Osmosis Water Purification Process. The device use pedal to harms human motion
to convert it into usable power to run a reverse osmosis filtration system.
AIM
The Aim of Fabricating a pedal-powdered water purifier is to
provide a sustainable and eco-friendly solution for water
purification, utilizing human energy for pedal power.
Accessibility: To offer a solution for purifying water that doesn't rely
on electricity.
Sustainability: Utilize human energy (pedaling) as a power source.
Clean Water Provision: Provide a cost-effective method for purifying
water, removing contaminants, pathogens, and impurities, thus making
it safe for drinking and daily use.
Health Improvement: Combat waterborne diseases by offering a
practical means of purifying water.
Education and Awareness: Raise awareness about water quality
issues and promote a deeper understanding of the importance of clean
water
OBJECTIVES
Efficient Filtration: Develop a filtration system capable of effectively
removing contaminants, pathogens, and impurities from water to meet
safety and health standards.
Human-Powered Design: Create a pedal-operated mechanism that
efficiently drives the water purification process
Portability and Accessibility: Design a compact and portable system that
can be easily transported and set up in different locations, especially in
areas lacking infrastructure or access to clean water.
Affordability and Sustainability: Utilize cost-effective materials and
technologies to keep the production and maintenance costs low.
Water Quality Assurance: Ensure the system's efficacy through testing
and validation.
Environmental Impact: Minimize environmental impact by using eco-
friendly materials and promoting responsible water usage practices within
the community.
METHODOLOGY
Literature survey
Assembly
Trial
ADVANTAGES
Off-Grid Operation.
Environmentally Friendly.
Low Operating Costs and Utilization of Local Resources.
Improved Water Quality and Community Health Impact.
Community Empowerment and Education and Awareness.
Adaptability to Different Environments and Scalability.
Useful in emergency situations or disaster-stricken areas.
Provides a sustainable solution for accessing clean water.
MATERIAL SELECTION
SL NO
PARTS
1 PEDAL
2 FREE WHEELS OF BICYCLE
3 DYNAMO
4 STRUCTURAL ARRANGEMENT
FRAME (OR) CHASIS FRAME
5 BATTERIES
6 WATER FILTERS
7 CYCLE CHAIN
8 PULLEY
9 FILTERS
Thank You
ABHISHEK AP
CHARAN S
TEJAS M