You are on page 1of 6

S.

NO DESCRIPTION UNIT QTY

I(a) Admin Block

PHE WORKS
Supply, Installation and Commissioning of Jaquar Make Model:
39951UFSM EWC Wall Hung Mounted with UF Soft close slim seat
PH-1 cover, Hinges nad necessary accessories etc 'P' trap with Grohe 5 No.
make Concealed cistern with full frame.

Supply, Installation & Commissioning of Jaquar Make Model: ALD-


CHR-573 Health Faucet with 1.2m long flexible Tube and wall hook
PH-2 of Chrome Finish for complete finish item of work wih all neecessary 5 No
accessories etc

Supply, Installation & Commissioning of Jaquar Make Model: URS-


PH-3 WHT-13255 Urinal with Sensor & Spreader Size 480x300x740 mm 4 No
with all necessary Accessories etc

Supply, Installation & Commissioning of Jaquar Make Model


No.KUS-WHT-35935 Rectangular Table Top hand wash basin
565x420x140mm with 1 No.Sensor Faucet Model: SNR-CHR-51027
PH-4 for Wash Basin with all necessary accessories etc for Male & Female 4 No.
Toilets

Supply, Installation & Commissioning of Jaquar Make Model


No.ONS-WHT-10801 Wall Hung Integrated hand wash basin
490x450x375mm with 1 No.Sensor Faucet Model: SNR-CHR-51027
PH-5 for Wash Basinwith all necessary accessories etc for PHC Toilet 1 No.

Supplying and fixing of Jaquar Make Model: SE-CHR-810US450X


Rectangular shaped Urinal partition with 8mm frosted glass 7 Size:
PH-6 900mmHx4450mmW for urinals including necessary accessories etc 3 No.

Supply & Fixing of Jaquar Make Model No: KUP-CHR-35041PM Two


PH-7 Way Bib Cock with all necessary accessories etc for EWC. 5 No.
Supply & Fixing of Jaquar Make Model No: ALD-WHM-
769L250X190 Bottle Trap (with Internal Partition) 32mm Size with
PH-8 250mm & 190mm Long Wall Connection Pipes & Wall Flange for 5 No.
Wash basin

Supply & Fixing of Jaquar Make Long Body Bib Cock with all
PH-9 1 No.
necessary accessories etc.Janitor Room

Supply & Fixing of Jaquar Make Toilet Paper holder complete with
PH-10 5 No.
all necessary accessories etc

Supply & Fixing of Jaquar Make Liquid Soap Dish with all necessary
PH-11 complete finish item of work. 3 No.

Supplying and Fixing of Hand Dryer Euronics EH-26 SS Electrically


PH-12 2 No.
operated complete wth all necessary accessoires.

Concealed Internal Piping :

Supplying CPVC pipes SDR 11 with solvent joints as per specification


in ground or in wall conforming to relevant ASTM-D - 2846 and 9IS
15778:2007) code of Tees, Elbows, bends, reducers, coupling,
running joints, union flanges etc. chasing masonry walls and making
good the walls and floors to the originals, surface and fixing CPVC
PH-13 clamps including cost and conveyance of all materials and labour
charges complete for finished item of work. (Internal Water Supply
Piping)

The entire piping system in part or as a whole has to be tested to a


hydraulic test pressure of 7 kg/sq.cm for a period of not less than 24
hours. the piping shall be concealed / commissioned only after
satisfactory testing of the system.

a For Toilet internal Piping

22.20 MM OD (Cold Water) - SSR - 671 30 Mts


28.60 MM OD (Cold Water) - SSR - 672 60 Mts

Supplying & Fixing tested Gun Metal Peet (Gate) Valve ISI mark
make as approved by Engineer, screw type 1st quality of approved
type including cost and conveyance of all materials & labour
PH-14 charges at all levels in all floors for following.

a 20 mm dia NB Size - SSR - 451 1 Nos


b 25 mm dia NB Size - SSR - 454 1 Nos

Supplying & fixing of Anti-Cockroach Jali/Trap Floor Drain with


PH-15 Chrome Finished
100 mm dia Inlet- 75 mm (3") outlet pipe Rate as per SSR (sl no
576) 12 Nos

Supplying, laying, jointing & fixing in position under floor against


wall in chases PVC SWR drainage pipes, specials & rubber rings of
approved make conforming to IS:13592 Type 'B' (6 kg/sq.cm.) using
lubricant as per manufacturer's specification, including specials such
as plain bends, off sets, door bends, single junctions, double
junctions as per site requirement, fixing with PVC clamps if
PH-16 necessary with required number of Bombay nails, hanger rods
including cost and conveyance of all materials to site, labour
charges etc. Complete for finished item of work at all floor levels.

a 40 mm dia UPVC Pipe for Wash Basin & Urinals 20 Mts


b 75 mm dia UPVC Pipe for Waste Pipe 30 Mts
c 110 mm dia UPVC Pipe for Soil Pipe 50 Mts

Supplying & fixing 150 mm x 100 mm SWG gully traps of ISI make
conforming to ISI 651 & 4127 with C.I Grating & Constg. Brick
masonry in CM 1:6 prop. Intermediate chamber and fitted with
PH-17 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover 1 No.

PH-18 Wall and Floor Chipping works for install the pipes 1 LS

V Total for PHE Works


Supply & Installation
Rate Amount

46,500.00 232,500.00

3,200.00 16,000.00

35,400.00 141,600.00

37,500.00 150,000.00

41,200.00 41,200.00

11,250.00 33,750.00

3,755.00 18,775.00
3,875.00 19,375.00

3,225.00 3,225.00

2,575.00 12,875.00

4,500.00 13,500.00

17,750.00 35,500.00

540.00 16,200.00
630.00 37,800.00

2,800.00 2,800.00
3,030.00 3,030.00

1,120.00 13,440.00

510.00 10,200.00
890.00 26,700.00
1,210.00 60,500.00

15,750.00 15,750.00

80,000.00 80,000.00

984,720.00

You might also like