Professional Documents
Culture Documents
Natron BP Critical Power Battery 021124 ProdNameUpdate
Natron BP Critical Power Battery 021124 ProdNameUpdate
Features
Nonflammable Industry leading
Rapid Cycle-Rate Chemistry power capacity
100-0-100% SOC
repeatedly with no wait, & Construction & performance
settling, or rest periods UL listed and independent
safety study confirmed
40/1 Heating
Overcharge
> 50 k
Lead
Lead Acid Li-ION Natron Lead Acid Li-ION Natron Li-ION Natron
Acid
High Power
Over 25 kW sustained discharge
Power vs. Run Time(s) 25kw Discharge Curve
Balancing Unit
Interface Board
Protection Board
No BMS necessary! Natron’s chemistry is so safe Sodium-ion is inherently safe and fault tolerant.
that thermal runaway is not possible. Our onboard
circuitry provides only for charging, cell balancing • Nonflammable during and after nail penetration
and communications. or flame test.
Specifications
Performance Electrical
Up to 10Mw
Parallel Operation
*Depending on charge current Consult factory for
system configuration
Specifications
Thermal Monitoring and Communications
Operating Temperature Range -20° to +50°C / -4° to 122°F Battery, Voltage, Charge, Power, Temperature
Survival Temperature Range (1 hr) -50° to +50°C / -58° to 122°F Supported communication protocols Modbus TCP/IP
Reated Transportation
-20° to +50°C / -4° to 122°F
Temperature Range*
Mechanical Applications
Exterior Dimensions (HxWxD) 246x269x951mm / 9.7x10.6x37.4in UPS Data Centers, Mission Critical
Facilities
Mass 75 kg / 165 lbs
Telecom Backup power on and off-grid sites
Lifting mechanism available
Additional Information
natron.energy/product
© 2023 Natron Energy, Inc. Preliminary Info: Rev 2.1 11/16/23 natron.energy 4