Professional Documents
Culture Documents
1b I Tension Members
1b I Tension Members
By
Mr. Sudhir B. Gayake (Assistant Professor)
Mail Id- gayakesudhircivil@sanjivani.org.in
(i) Various cross sections such as solid threaded rod, cable and angle sections.
(ii) Limit strength due to yielding of gross section, rupture of critical section and block shear
failure.
(iii) Design of tension member: using single and double angle sections, connections of
member with gusset plate by bolts and welds.
Lc
t= thickness of leg
(3) Design strngth due to block shear (Tdb)-
The failure of the end connection as a unit along the centers of the bolt holes in
tension and shear plane is termed as block failure. The block shear strength (Tdb) is least of
the below;
Tdb1 = ( Avg fy/(√3γm0) + 0.9Atn fu /γm1 )
or
Tdb2 = (0.9Avn fu /(√3γm1) + Atg fy /γm0 )
Prof. Sudhir B. Gayake,SCOE Kopargaon.
where,
Avg and Avn = minimum gross and net area in shear along a line of transmitted force
respectively
Atg and Atn = minimum gross and net area in tension from the hole to the toe of the angle
perpendicular to the line of transmitted force
Tension area
e
e p p p
Shear area