Injector circuit of Remanufactured could cause possible Misfiring through its loss
connection at the injector harness connector.
While machine under operation and due to vibration the loss connection at the injector connector could cause injector 3-5 (no.3 cylinder injector open circuit) code to appear and disappear and loss of power and subsequent possible damage to injector driver at ECM. And at the supply side of Wire for one injector is open then the shared wire to the injector is also shows the same FMI. example: NO.3 AND NO.4 cylinder injectors share common supply wire and due to this common wire, two erro codes could appeared and cause two injector miss but if the return wire is loss connection at the injector connector then only one cylinder could possibly miss fire 🔥 and 5 injectors only operates.