Professional Documents
Culture Documents
BladeModeler 11.0
Introductory Training
Registered Trademarks:
ANSYS is a registered trademark of SAS IP Inc.
All other product names mentioned in this manual are trademarks or registered trademarks of their
respective manufacturers.
Disclaimer Notice:
This document has been reviewed and approved in accordance with the ANSYS, Inc.
Documentation Review and Approval Procedures. This ANSYS Inc. software product (the
Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an
ANSYS Software License Agreement that contains provisions concerning non-disclosure, copying,
length and nature of use, warranties, disclaimers and remedies, and other provisions. The
Program and Documentation may be used or copied only in accordance with the terms of that
License Agreement.
Course Outline
Training Manual
Lectures Workshops
1. Introduction 0. ANSYS TurboSystem
2. Turbomachinery Basics 1. Axial Turbine Stator
3. Turbo Systems Overview 2. Low Pressure Compressor
4. BladeGen 3. Axial Fan Blade
5. BladeEditor 4. Axial Turbine Blade
5. High Pressure Compressor
Additional Lectures Impeller with Splitter
6. Vista CCD 6. Mixed Flow Pump Impeller
7. Vista CPD 7. Radial Flow Pump Impeller
8. Radial Turbine Rotor
9. Axial Turbine Rotor
Technical Support
Training Manual