Professional Documents
Culture Documents
Introduction Prepare Surface Concrete
Introduction Prepare Surface Concrete
TECHNICAL
S
from the leading resource for education
and information in the repair industry...
AN INTRODUCTION
TO:
ICRI Technical Guideline No. 310.2-1997
Surface Preparation
Selecting ad Specifying Concrete
Surface Preparation for Sealers,
Coatings and Polymer Overlays
Formerly
03732
ICRI Guideline 310.2-1997
Surface Preparation
Selecting and Specifying Concrete Surface
Preparation for Sealers, Coatings and Polymer
Overlays
Purpose of This
Guideline
Provides designers, specifiers, contractors and
manufactures with the tools they need to select
and specify methods for preparing concrete
surfaces prior to the application of sealers,
coatings and polymer overlay systems.
ICRI Guideline 310.2-1997
Surface Preparation
Sealers, Coatings & Polymer Overlays
What is covered?
• A workbook designed to organize and prioritize
information needed for good selection decisions.
• A chart which identifies methods capable of production the
profile typically recommended for each coating type.
• Presents capabilities, limitations, operating requirements,
environmental factors, and safety consideration for each
method of surface preparation.
• Surface Profile Chips – Replicas of typical surfaces
produced by one or more of the methods providing a
visual standard for purposes of specification, execution
and verification.
ICRI Guideline 310.2-1997
Surface Preparation
Sealers, Coatings & Polymer Overlays
S
from the leading resource for education
and information in the repair industry...
Find it at
WWW.ICRI.ORG
ICRI Technical Guideline No. 310.2-1997
Surface Preparation
Selecting ad Specifying Concrete
Surface Preparation for Sealers,
Coatings and Polymer Overlays