P r ob l e m S t at e m e nt In a particular portion of an aircraft hull, multiple cracks are found in the revit hole during the periodic inspection. Thickness of the plate is 3 mm, and the initial edge crack is of 2 mm. Determine fatigue life to which the crack reaches its critical length. ΔKth = 160 MPa√mm, KC = 1600 MPa√mm, C = 5.21E-13, m = 3. L e a rn i ng Ou tc o m es • From the above tutorial we have learned – To understand about multiple crack propagation – Use of single edge crack S t e ps • Importing the CDB file into Franc3D software • Incorporating the crack at critical location • Perform Static Crack analysis – to determine the SIF of initial crack • Perform Growth crack analysis – to set crack parameters • Perform Crack propagation analysis till it becomes through-wall • Review results I n te r p re ta t io n • Interpretation of SIF value with fracture toughness value.