This document provides instructions for configuring an ipLDK3000 phone system for the Ministry of Primary Resource and Tourism in Brunei. It includes steps to set the nation code, numbering plan, assign incoming and outgoing call routes, restrict outgoing calls to mobile numbers, and enable call forwarding between specific stations.
This document provides instructions for configuring an ipLDK3000 phone system for the Ministry of Primary Resource and Tourism in Brunei. It includes steps to set the nation code, numbering plan, assign incoming and outgoing call routes, restrict outgoing calls to mobile numbers, and enable call forwarding between specific stations.
This document provides instructions for configuring an ipLDK3000 phone system for the Ministry of Primary Resource and Tourism in Brunei. It includes steps to set the nation code, numbering plan, assign incoming and outgoing call routes, restrict outgoing calls to mobile numbers, and enable call forwarding between specific stations.
Tourism Quick Installation Guide and Basic Programming / User Manual LDKPC Admin and configuration • Switch off SW1 DIP “4” • Connect PC to ipLDK3000 • Run LDK PC admin • ID: “administrator” & Password: “0000” • Go to Tools > Site Information > Enter Name (MPRT) & IP (192.168.1.1) • Go to Files > Connect Setting the Nation Code as Brunei • Go to “Pre-programmed” > Location Information • Nation : “Brunei” • Site Name : “MPRT” Numbering Plan • Go to “Pre-programmed” > “Configuration” • Select Numbering Plan Type: “Type 1” • Right Click on the Station Number 100 > Click “Update Tool” • Click “All Station Delete” • On the Station Number 100, Change To 1000 • Click “Update Station Number and Next” • Follow the “MPRT MDF” Excel file. CO Ring Assignment – for Incoming Calls • Go to “CO Line Base Program” > “CO Ring Assignment” • Select CO num > “1” > Refresh • Right Click on “Destination|Delay” > Update Tool • Input CO num Start “1” and End “6” • Mode: “Day” > Type: “Station” > Range: Start “1000” End “1003” • Click Update CO Group Access Station – Outgoing Call • Click on “CO Line Base Program” > “CO Line List” • CO num Start “1” End “6” > CO Attr I • Right Click > Update Tool • CO num “1” > CO Group “2” > Update • CO num “4” and “6” > CO Group “2” > Update • Go to “Station Based Program” > “CO Group Access Station” • CO Group “2” > Update Tool > Start “1000” End “2535” > Update • All user can use either CO1, CO4, CO5 or CO6 CO COS(Class of Service) and COR(Class of Restriction) - Outgoing call for Mobile • Go to Table > Toll exception table > Deny A • Right Click on Index 1 > Update Tool > Value “7” > Update • On Index 2 > Update Tool > Value “8” > Update • Go to Station Base Program > Display Station • Right Click on Station Number > Update Tool • Start “1003” End “2535” • Day COS “2” Night COS “2” > Update • All number except 1000 - 1003, cannot call mobile. Call Forwarding from 1000 to 1002 and 1003 • Go to Station Group > Station Group • Right Click on *620 > Update Tool • Group “*620” > Group Type “Ring” > Pick Up Attribute “ON” • Add 1001 and 1002 to Member > Update
• On the Station 1000, pick up handheld, press DND/TRN button