You are on page 1of 7

THANDAK based

Air-conditioning system
Includes:
3 x Split unit A/C’s with remote(1yr
mfr warranty)
THANDAK MAX Chiller unit
Rs.200,000/-
List of items

1) 3 x Wall mounted Indoor Split A/C units [Water based](Includesremote, wiring,


piping, fi ttings and install ation + 1 year manufacturers warranty)
2) 30min Evaporator / Dryer unit (Includes10’x 6’ [Pneumatic jack controll ed
ejection]Metal tray, 3 x one way solenoid valves,1 x 2 way solenoid valve,
Propane cyli nder, Oxygen cyli nder, Pneumatic jack, Control Module, piping,
wiring and install ation)
3) Chill er unit (Includespiping and fi tting of a pump system, Polyurethane insulated
drum)
4) Pre-Chill er / Accumulator Unit (Includes3 x li quid to li quid heat exchangers,
Insulated drum unit, 2 x Solenoid valves, Control module, piping and fitting) –
This unit is a component of the Chill er unit by pre-chilli ng the water before it
enters the Chill er unit and a component of the Evaporator/Dryer unit by way of
Pneumatic jack ejection of the dried THANDAK MAX into the Chill er unit by
utili zing a direct chute into the Chill er unit.
5) Uninterrupted Power Supply (Includes3000watt sine wave UPS, 4 x 12volt
150Ah batteries,cablesand wiring)
6) Pump system (Includesmain pump[high pressure] , 10m pump, piping, control
wiring and THANDAK MAX removal system from Chill er unit)
Depiction of Plant Desin
Why use THANDAK MAX?
• Water based Air-conditioning utilizes
chilled liquid between 7-8 degrees
Celsius, whereas CRYO’s THANDAK
MAX chills water without allowing it to
freeze to between -12.7 to -15.3
degrees Celsius. A 22 degrees Celsius
drop in operating temperature means
you now have a hyper-powerful A/C
Energy Efficiency
The CRYO THANDAK MAX formula uses
an Endothermic reaction to perform
chilling whereas a conventional A/C
systems utilize a compressor. The
compressor is an inefficient system as
far as energy is concerned. And hogs
most of our energy in the home by
occupying the refrigerator, deep freezer
and air-conditioning.
Endothermic Reaction
• How does an Endothermic reaction save us
energy?
• An Endothermic reaction is simply a chemical
reaction which requires no electricity and
produces energy in various forms. This is a
constant of nature and has to take place
when the THANDAK MAX formula dissolves
in water.
How does this technology differ from
previous technologies?
• As we have already observed that
previous technologies do not
intelligently use energy whereas
CRYO’s THANDAK MAX based system
can be run on solar power alone.
Therefore one can have deep freezers,
refrigerators and Air-conditioning in the
middle of the desert.

You might also like