This document provides details on the design and construction of a 69kV substation for KCC Mall of Cotabato City. It outlines the contractor, methodology, standard composition, yard requirements, safety protocols, proposed construction schedule, manpower schedule, and equipment to be used. The key components of the substation include disconnecting switches, lightning arresters, current and potential transformers, gas circuit breakers, a 10MVA power transformer, XLPE cable, and a grounding system. Standard practices for substation construction including following the project documents, electrical and building codes, and manufacturer standards are also described.
This document provides details on the design and construction of a 69kV substation for KCC Mall of Cotabato City. It outlines the contractor, methodology, standard composition, yard requirements, safety protocols, proposed construction schedule, manpower schedule, and equipment to be used. The key components of the substation include disconnecting switches, lightning arresters, current and potential transformers, gas circuit breakers, a 10MVA power transformer, XLPE cable, and a grounding system. Standard practices for substation construction including following the project documents, electrical and building codes, and manufacturer standards are also described.
This document provides details on the design and construction of a 69kV substation for KCC Mall of Cotabato City. It outlines the contractor, methodology, standard composition, yard requirements, safety protocols, proposed construction schedule, manpower schedule, and equipment to be used. The key components of the substation include disconnecting switches, lightning arresters, current and potential transformers, gas circuit breakers, a 10MVA power transformer, XLPE cable, and a grounding system. Standard practices for substation construction including following the project documents, electrical and building codes, and manufacturer standards are also described.
Methodology Flow Chart Methodology Flow Chart Substation’s Primary Parts Disconnecting Switch (DS) Lightning Arrester (LA) Current Transformer (CT) Potential Transformer (PT) Gas Circuit Breaker (GCB) Power Transformer 10MVA XLPE Cable Grounding System MVSG (by owner) Standard Substation Composition Standard Fallow in Constructing Substation
The project documents, the approved drawings
The End Client Standard Civil Works, sets out the majority of the requirements for civil design and construction National Building Code of the Philippines Philippines Electrical Code Environmental Compliance Certificate of the Philippines National and Locally Permits and bylaws Department of Public Works and Highway (DPWH) Manufacturer and other standard which is Internationally accepted Substation Yard Requirements Materials; Base Course, Sub Base, Subgrade, and Selected fill Sealed base course; Fine crushed rock (FCR) layer consisting of base course material as per acceptable standard of NBC/DPWH Unsealed base course; natural gravel layer consisting of unsealed material Sub-base course; FCR layer(s) below base course and overlaying subgrade or select fill consisting of sub-base course material Standard Sub-grade; Soil below the sub-base course and must be either suitable in site material or must be built up using select fill Select fill; Material free of vegetable and other deleterious matter, free of clay lumps Compaction Table Safety Protocol Safety issue on the builders area are typically nominated on the plan, it must be verified/identified by the Substation Construction Safety officer during the pre- start meeting The Safe Work Areas must be demarcated by
the appropriate barrier (i.e. fences, bunting,
flags) as defined in OSHA, EH&S contruction safety standard Excavations Extreme caution must be exercised when excavating inside or adjacent to substations to avoid damage to or contact with existing underground services. Excavation inside/outside the substation a Permit to Dig is required for all excavations >300mm SAFETY MEASURE APSI Worker are required to wear PPE APSI fallow International Safety Standard also with the end client safety & electrical standard
APSI exercise OSHA’s Electrical & Safety
Standard, NFPA 70E Electrical safety requirements for workers and workplace. Electrical Safety Test Prior to Energization
Power Quality Analyzer
Protection Relay Testing CT and PT Testing Hi pot Testing Power Circuit Breaker Test Insulation Resistance Test (IR) Ground Resistance Test Proposed Construction Schedule Manpower Schedule Equipment/Tool Schedule THANK YOU ALTERNATIVE POWER SOLUTION INCORPORATED