You are on page 1of 8

CECOS UNIVERSITY OF IT AND EMERGING

SCIENCES PESHAWAR
CIVIL ENGINEERING DEPARTMENT

Presentation Topic: Stabilization of Expansive soil using .

Polypropylene and coconut fibers


Presenter Name: Sajjad Ahmad
Class ID: Cu-1552-2020
Presented to: Prof Dr Asim Farooq
PRESENTATION OUTLINE
 Research problem
 Introduction
• Stabilization by Fibers
• Expansive soil
• Fibers
 Methodology
 Conclusions and results
 Recommendations for future work
RESEARCH PROBLEM

• Black cotton soil exhibit high rate of swelling and


shrinkage
• Expansive soil is unsuitable for construction.
• Expansive soil undergoes excessive settlement .
INTRODUCTION
 Stabilization by Fibers
 Expansive soil
• Expansive soils have the potential to contract or
expand.
• Due to mineral montmorillonite,smectite.
 FIBERS
• Polypropylene fibers, a synthetic material.
• The coconut fibers also called coconut coir.
LITERATURE REVEIW
 Soltani (2018) demonstrated the influence of two types of
tape-shaped jute fibers.
 Siva Kumar Babu (2008) work on different percentage of
coir fibers.
 Arif work on CBR value.
 Ankit jain work on chemical stabilization.
UCS Vs LIME
60
UCS (kn/m^2)

50
40
30
20
10
0
0 0.5 0.75 1

LIME(%)
Methodology

Collection of Soil Preparation


materials classification of sample

Unconfined California
Compaction
compression bearing
tests
test. ratio
conclusions
Results and and
XRD,SEM
comparison recommend
ation
Results and conclusion's
Properties Unreinforced 0.75% 1% coconut 0.75% 1% of
sample coconut fibers polypropylene polypropylene
fibers fibers fibers

Property   Values Value values values


Specific gravity 2.62 2.64 2.65 2.63 2.77
Liquid limit (%) 41 37 35 35 33
Plastic limit (%) 19.153 16 15.5 17.63 16
Unconfined 31.38 40.2 46.1 46.1 48
compressive strength
(kn/m2)

Cohesion (c) (kn/m2) 15.7 20.5 23.04 23.04 24


California bearing 8.86 10 20 19.226 22
ratio (65 blows) %
Permeability test (cm/s) 4.31*10^-5 2.6*10^-5 2.72*10^5 2.653*10^-5 2.3*10^-5

Maximum density 1.83 1.88 1.93 2.02 2.3


(gm/cc)
Omc % 16 15 14 13.5 13
RECOMMENDATIONS

• 0.75% of polypropylene fibers is used.


• research must be performed on 180 days of curing.
• performed on basis of long term strength.
• Studies should done for deep foundation.

You might also like