Professional Documents
Culture Documents
Oxygen Plants
Iron Ore
Pik Iron Machine
Sinter
Import Slabs
(150.000 DWT) Torpedo
Secondary
BOF Vessels
Blast Furnaces Metallungy
Coal Desulphurization
Coke Plants
By-Products
Scrap
Iron ore and coal Coke Plants produce Metallurgical Lime In Sinter Plant, iron The Pulverized Coal Hot metal is Hot metal Hot metal transported by torpedo
aretransported by the coke required by produced in Lime Kilns ore fines, coke and Injection Plants enables produced in Blast producet in Blast cars, is mixed with scrap and
seaways and the Blast Furnaces. is used in Basic various raw material the charge of semi coking Furnaces by Furnaces is alloying materials in BOF Vessels
Besides various by- or non-coking coals to the
carried to Oxygen Furnaces. fines are united for using lump ore, desulphurized in and pure oxygen is blown in, in
products are produced Blast Furnaces, thus
stockyards by belt Lime fines are used in further use sinter, pellet and Desulphurization order to produce steel.
during Coke-Plant reducing the coke
conveyors. Operation. Sinter Plant. consumption. coke. Plant.
2
L Plate, side trimmed
LKK Plate, mill edge
Plate Shear
DS Casting Slab
Radiograph
Slab Reheating
Furnace No: 1 Hot Strip Mill No: 1
Combination Mill
RKK :
Hot rolled coil,
Continuous Casting mill edge
Plants
Slab Reheating
Furnace No: 2
İmport Slab
Slab Reheating
Furnace No: 3
Liquid steel in the ladle is cast Continuously cast or import The Slab heated in slab
into moulds continuously in slabs are heated in slab Reheating Furnace No. II and
slab casters and solidified to Reheating Furnace No. 1 and III are rolled in Hot Strip Mill
produce slab. There are 4 slab then rolled as plates or hot No. II to produce hot rolled
casters. rolled coils in hot Strip Mill coils.
No.1
3
KRKK Hot-rolled heavy thick. Coil mill edges
HCKK Hot rolled coil suitable for re-rolling mill edge
MRKK Hot rolled coil, mill edge, for floor plate
Slitting Line
RP Hot rolled, pickled coil, trimmed edges
RPKK Hot rolled, pickled coil, mill edges
TRP Hot rolled, pickled coil, trimmed edges skinpassed
TRPKK Hot rolled, pickled coil, mill edges skinpassed
In the Coil Preparation Line, In Pickling Lines, surfaces of Black or pickled hot rolled coils
hot rolled coils are skin-passed hot rolled coils are cleaned in are cut to length in Hot
or inspected for surface acid bath. Shearing Lines or slit in Slitting
defects. Line as Required.
4
www.erdemir.com.tr www.erdemir.com.tr www.erdemir.com.tr www.erdemir.com.tr www.erdemir.com.tr www.erdemir.com.tr www.erdemir.com.tr www.erdemir.com.tr
www.erdemir.com.tr
EREĞLİ DEMİR VE ÇELİK FAB. T.A.Ş.
Merkez Fabrika Ankara İstanbul
Tel: +90 372 323 25 00 Tel: +90 312 409 14 00 Tel: +90 216 302 30 40
www.erdemir.com.tr
Fax: +90 372 316 39 69/ 316 03 01 Fax:+90 312 442 29 23 Fax: +90 216 369 49 60
e-mail : erdinfo@erdemir.com.tr e-mail: ankara@erdemir.com.tr e-mail: istanbul@erdemir.com.tr
Uzunkum No:7 Piyade Sokak No: 27 Atatürk Cad. Sıtkıbey Pl. No:82 Kat:2 D:10-11
67330 Kdz. Ereğli/ZONGULDAK 06550 Çankaya/ANKARA 81080 Erenköy/İSTANBUL
In Cold Rolling Mill No.1, Oil on the surfaces of the thin In the Batch Annealing To improve surface quality Cold rolled and tempered In Cold Rolling Mill No.II, hot
cleaned and pickled coils are coils are cleaned before the Furnaces, the cold reduced and physical characteristics coils are cut to desired length rolled coils are pickled and
cold reduced in Tandem Mill annealing process in the coils are annealed to improve of the annealed cold rolled in Cold Shearing Lines. then cold rolled in the
under a certain speed and Alkali Cleaning Line. their microstructural coils are passed through Continuous Pickling /
tension. characteristics. Temper Mill. Tandem Line.
5
TNR Tinplate in coil
TFR Tin free steel in coil
Continuous Temper Mill CCRS Cold rolled sheet, mill edge (CAL)
Annealing Line
CCRSK Cold rolled coil, side trimmed (CAL)
Pickled and cold rolled coils are Cold Rolled Coils are slit to The coils rolled to required Tin or chromium plated coils
annealed continuously in the required widths in Cold Slitting thickness are cleaned, are cut to desired length and
Continuous Annealing Line Line. electroplated with tin or then packaged as tinplate or
(CAL) and then packaged after chromium according to the TFS sheets.
tempering. desired coating thickness in the
Electrolytic Tinning & TFS Line.
6