Professional Documents
Culture Documents
• Use the PoE adapter comes with a power beam device box to connect and power on the device.
• Connect Cat6 LAN cable from PoE Out port in Adapter to device Lan port.
• IN PoE adapter LAN port connect Laptop/Computer LAN port.
Power Beam 5AC airOS8 Login Device
1.Local RX DATA Rate – in this option you can see the connection status of the Access Point device.
2.Remote RX Data Rate- this option will show remote site device signal strength and data rate.
This connected status your UBNT power beam AC device ready for installation at your location.
But before going to install change the default password to make protect your point-to-point connectivity always.
UBNT Power Beam 5 AC 500 Firmware Upgrade Direct from Internet
Inside the SYSTEM Tab, you can manage your
Power Beam AC Device.