Professional Documents
Culture Documents
METER
READING
DRILL
1. Always read all the dials from right to left, starting from Dial E to Dial A.
2. Read the number of the pointer of the dial. When the pointer is between two numbers,
the lower number is recorded.
3. If the pointer appears to be exactly on a number, check the dial to the right to find out
the correct reading
•If the dial on the right has passed zero, then use the number the pointer is pointing on
the dial you are reading
•If the dial has not passed zero, then make use of the smaller number, of the dial you are
reading
4. Read numbers from left to right.
Example 1: Read and interpret the dials on the electric meter
below.
Start reading the dials from right to left.
1. Start reading from right to left (clockwise). Read the number by the pointer of the
dial. When the pointer is between two numbers, the lower number is recorded.
2. When the pointer is directly on the number, look at the dial to the right. If it passed
zero, use the next higher number. If the dial has not passed zero, use the lower
number.
8 1 5 3
B 7314 7512
C 3926 4182
D 6142 6389
E 6673 6816
For Station 2 – Complete the table for water consumption.