At present we can see the temperature of this planet is
increasing day by day so that the people use various types of things to overcome that matter some rich countries use air conditioners but poor countries cant use ac machines because they have to pay unbearable electricity bill. So to overcome this type of problem I have made a project which is an “Automatic Fan Controller” . CIRCUIT DIAGRAM ADVANTAGES It is very economical and easy to handle by the user. Speed varies automatically, so that it controls the speed without using it manually. It is helpful to disabled people. It is very easy to install in offices, houses etc. Save energy by slowing down its speed in low temperature. LIST OF COMPONENTS:- Vero board Ic (Lm 35 ) Transistor (Bc 548) Fan Resistor (10 k ohm) Transformer (12 volts) Jumper wires WORKING This project is basically based on that how we can save energy easily. The working of this project is like it works in only at low temperature because in this automatic fan I have used a heat sensor ( lm 35) which will immediately start working when the temperature is low and stop working when the temperature is high. We have also used a transistor (bc 548) which amplifies the current. We can operate this circuit with 6V to 12V power . The special thing of this circuit is this circuit is switched on and off according to the temperature of the environment. So the whole working of this fan depends upon the ic (lm 35). CONCLUSION
From this project we conclude that this project is for reducing
the power consumption and also to assist the people who are disabled and are unable to control the speed of fan. OU Y N K HA T