Professional Documents
Culture Documents
DESIGN
GROUP PROJECTS
OUTPUTS
14/11/2023
Table1: FCE 531 Exercise No. 1
Exercise No.
All 1 Constitute the class into 11 Project Groups
Group A 1 Extract the relevant information from FCE 332: Strength of Materials IIB and identify its
application in this course.
Group B 1 Extract the relevant information from FCE 432: Analysis and Design of Structures and identify
its application in this course.
Group C 1 List the relevant codes of practice from both BS and Eurocode that will be relevant in this
course.
Group D 1 With reference to different Codes of Practice, differentiate between Permissible stress method,
Load factor method, and Limit state method of structural design.
Group E 1 With reference to different Wind loading codes, describe how wind loading analysis has
developed over the past 20 years.
Group F 1 With reference to different Earthquake loading codes, describe how seismic analysis is
applicable in structural design and analysis.
Group G 1 With reference to a cross-section of a beam element, describe the difference between elastic
design and plastic design of structures.
Group H 1 Describe the interface between plastic analysis and plastic design.
Group I 1 Briefly describe the key features of the computer aided structural analysis and design packages
available in the market.
Group J 1 Briefly describe how computer aided structural analysis and design packages are interfaced with
the drawings tool.
Group K 1 Using any one common Drafting software of your choice, demonstrate how a professional
drawing is supposed to be presented for both approval to the county authorities, and also for
implementation on site.
2
Table2: FCE 531 Exercise No. 2
Exercise
No.
Group B 2 Compare the two codes EN1992 Eurocode 2 and BS8110 in the
context of design of primary structural elements.
Group F 2 Describe the Aims and objectives of the Eurocodes and their status
Group K 2 Will Eurocode design cost more to construct? Illustrate your answer.
3
Group Assignments: Assessment
• Photographs (Group D)
• Geometrical Representation of the Structure
(Group I)
• Model of the Structure (Group I)
• Computations of Volumes etc. (Group J,
Group D)
• Final Weight of the Structure
GROUP B: Photographs (Hall 10)
5
GROUP B: Photographs (Hall 10)
6
GROUP B: Photographs (Hall 10)
7
GROUP B: Photographs (Hall 10)
8
GROUP B: Photographs (Hall 10)
9
GROUP I: Geometrical (Physical Sciences)
10
GROUP I: Geometrical (Physical Sciences)
11
GROUP I: Geometrical (Physical Sciences)
12
Group J: Calculations (Mamlaka)
Group J: Calculations (Mamlaka)
14
Group D: Calculations
(Education)
15
Table 3: FCE 531 Exercise No. 3
Group E 3 - -
16
Table 5: FCE 531 Exercise No. 3 (a) Dated November 2023
17