Professional Documents
Culture Documents
AAP|CDS
APPLICATION OF
DEVELOPMENT CONTROLS
Rule VII and VIII of National Building Code of the Philippines
AR 324 DESIGN 6 AAP|CDS
DEVELOPMENT
CONTROL Defined as “the set of inter-
acting regulations
concerning the physical
utilization of a lot and
governing the
planning/design of spaces
and/or the use or occupancy
of a building to be
introduced on a lot.”
AR 324 DESIGN 6 AAP|CDS
TOTAL LOT
AREA The Total Lot Area (TLA) is
the surface area of a
property on which a
proposed building is to be
constructed.
AR 324 DESIGN 6 AAP|CDS
TABLE VIII.2
TABLE VIII.3
AR 324 DESIGN 6 AAP|CDS
ALLOWABLE
MAXIMUM The maximum portion of the lot
BUILDING that may be occupied by the
building at grade level after
FOOTPRINT
satisfying setback, yard and
court requirements.
ALLOWABLE
MAXIMUM
BUILDING
FOOTPRINT
PERCENTAGE OF
SITE OCCUPANCY The Percentage of Site
Occupancy (PSO) is the
percentage of the maximum
allowable enclosed floor
area of any building in
relation to the Total Lot
Area.
It can be calculated by
dividing the area of the
building foot print by the lot
area (PSO = AMBF/TLA).
AR 324 DESIGN 6 AAP|CDS
BUILDING HEIGHT
LIMIT BHL is the maximum height
allowed for building based on
their proposed use or
occupancy.
AR 324 DESIGN 6 AAP|CDS
BUILDING HEIGHT
LIMIT BASED ON
TABLE VII.2
AR 324 DESIGN 6 AAP|CDS
ALLOWABLE
MAXIMUM VOLUME The limit of the total volume of
OF BUILDING space that can be occupied by a
building above grade level.
TYPES OF AMVB
INITIAL AMVB
Formula:
INITIAL AMVB = AMBF x
BHL
AR 324 DESIGN 6 AAP|CDS
TYPES OF AMVB
FINAL AMVB
STEPS IN
CALCULATING Step 1: AMBF x BHL = initial AMVB (“prism”)
AMBV FOR
Step 2: Superimpose the angular plane
BUILDING
originating from the RROW onto the “prism”;
based on Table VII.G.3.
ANGULAR
PLANE
AR 324 DESIGN 6 AAP|CDS
TABLE VII.G.3
TABLE OF
ANGLES/SLOPES
AR 324 DESIGN 6 AAP|CDS
INCREMENTAL
SETBACK The horizontal distance
between the outermost
building/line of a lower
floor and that of a higher
floor.
AR 324 DESIGN 6 AAP|CDS
Formula:
TGFA = GFA + NON-GFA AREAS
AR 324 DESIGN 6 AAP|CDS
Formula:
FLAR = GFA/TLA
AR 324 DESIGN 6 AAP|CDS
Formula:
TOSL = TLA – PSO
TOSL = ISA + USA
AR 324 DESIGN 6 AAP|CDS
TABLE VIII.1
ISA AND USA
AR 324 DESIGN 6 AAP|CDS
Formula:
MACA = PSO + ISA
AR 324 DESIGN 6 AAP|CDS
SAMPLE PROBLEM
A proposed high rise commercial building project on a project
site having a relatively flat slope.
The project site is an inside lot with a 40m wide frontage facing
a 20m wide RROW with a 2m wide sidewalk on each side.
AR 324 DESIGN 6 AAP|CDS
SAMPLE PROBLEM
A proposed high rise commercial building project on a project site
having a relatively flat slope.
The project site is an inside lot with a 40m wide frontage facing a
20m wide RROW with a 2m wide sidewalk on each side.
AR 324 DESIGN 6 AAP|CDS
QUESTION NO. 1
Table VIII.1
What is the maximum
allowable PSO based on
Table VIII.1 of PD 1096?
QUESTION NO. 2
QUESTION NO. 2
QUESTION NO. 2
Table VIII.1
What is the allowable
maximum building
footprint?
Table VIII.G.6
QUESTION NO. 2
AMBF BASED ON
TABLE VIII.G.6
AR 324 DESIGN 6
Table VIII.3 AAP|CDS
QUESTION NO. 2
W = 40.00 m
L = 60.00 m – 8.00 m
= 52.00 m
QUESTION NO. 2
W = 40.00 m – 3.00 m
W = 37.00 m
L = 60.00 m – 5.00 m
L = 55.00 m
AMBF BASED ON
LOT TYPE
AR 324 DESIGN 6 AAP|CDS
d. Table VIII.3
AMBF = 2080 sq.m.
e. Figure VIII.3
AMBF = 1920 sq.m.
AR 324 DESIGN 6 AAP|CDS
Table VII.2
QUESTION NO. 3
BHL = 180.00 m
Table VII.G.1
QUESTION NO. 4
MAXIMUM TGFA
QUESTION NO. 5
Step 1: Determine the zone and type of the lot. Know also
QUESTION NO. 5
whether the building will have a firewall or not.
What is the maximum
TGFA of the project? *C-3 zoned property
*With Firewall
Formula:
TGFA = BHL x PSO x TLA
Table VII.G.2
QUESTION NO. 5
Formula:
TGFA = GFA x MULTIPLIER
TGFA = 81, 600 sq.m. x 1.50
TGFA = 122, 400 sq.m.
AR 324 DESIGN 6 AAP|CDS
Table VII.2
QUESTION NO. 5
Formula:
TGFA = AMBF x BHL (no. of floors)
Table VIII.1
QUESTION NO. 6
ISA = % of TLA
ISA = 5% of TLA
ISA = 0.05 x 2400 sq.m.
ISA = 120 sq.m.
AR 324 DESIGN 6 AAP|CDS
Table VIII.1
QUESTION NO. 7
USA = % of TLA
USA = 5% of TLA
USA = 0.05 x 2400 sq.m.
USA = 120 sq.m.
AR 324 DESIGN 6 AAP|CDS
Table VIII.1
QUESTION NO. 8
TOSL = % of TLA
TOSL = 10% of TLA
TOSL = 0.10 x 2400 sq.m.
TOSL = 240 sq.m.
AR 324 DESIGN 6 AAP|CDS
Table VIII.1
QUESTION NO. 9
Table VII.G.1
QUESTION NO. 10
Table VII.G.3
QUESTION NO. 11
Formula:
TAN θ = OPPOSITE
ADJACENT
AR 324 DESIGN 6 AAP|CDS
RROW = 10.00 m
Front Setback = 5.00 m
TAN 60 = y/ 10 + 5 25.98 m
TAN 60 = y/ 15 3.00 m (floor to floor height)
y = tan60 (15) = 8.66 or 9th floor
y = 25.98 m
AR 324 DESIGN 6 AAP|CDS
THANK YOU