Professional Documents
Culture Documents
System Description
System Description
02 2006-11-01 31026219
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters.
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Contents
Contents
About This Document.....................................................................................................................1 1 System Overview ..........................................................................................................................1 2 Features and Benefits ...................................................................................................................3
2.1 Multi-Service Access Platform....................................................................................................................... 3 2.2 High-Density Subscriber Line Access ............................................................................................................ 5 2.3 Powerful Service Processing Capabilities ...................................................................................................... 5 2.4 Operable Broadband Video Service................................................................................................................ 6 2.5 Flexible Networking Modes ........................................................................................................................... 6 2.6 Carrier-Class Reliability ................................................................................................................................. 6 2.7 Range of UA5000 Models.............................................................................................................................. 7 2.8 Element Management System ........................................................................................................................ 8
4 Service Implementation.............................................................................................................21
4.1 PSTN Voice Services.................................................................................................................................... 21 4.2 Next Generation Voice Services ................................................................................................................... 22 4.3 Broadband Services ...................................................................................................................................... 23 4.4 Private Circuit Services ................................................................................................................................ 24 4.5 Multicast Video Service................................................................................................................................ 24
5 Networking Applications..........................................................................................................25
5.1 Typical Networking Topologies.................................................................................................................... 26 5.1.1 MSTP Networking ............................................................................................................................. 26 5.1.2 SDH+FE/GE Networking................................................................................................................... 28 5.1.3 SDH+STM-1 ATM Networking......................................................................................................... 30 5.2 Typical Application Scenarios ...................................................................................................................... 33 5.2.1 NGN Consolidation............................................................................................................................ 33
Issue 02 (2006-11-01)
Contents
UA5000 System Description 5.2.2 Private Circuit Service........................................................................................................................ 34 5.2.3 Triple Play .......................................................................................................................................... 35
ii
Issue 02 (2006-11-01)
Figures
Figures
Figure 1-1 UA5000 in the overall solution.......................................................................................................... 2 Figure 3-1 HABA frame layout ......................................................................................................................... 11 Figure 3-2 HABC frame layout ......................................................................................................................... 12 Figure 3-3 HABD frame layout......................................................................................................................... 13 Figure 3-4 HABE frame layout ......................................................................................................................... 14 Figure 3-5 HABF frame layout.......................................................................................................................... 15 Figure 3-6 HABL frame layout ......................................................................................................................... 16 Figure 5-1 Single-level MSTP networking........................................................................................................ 27 Figure 5-2 Two-level MSTP networking ........................................................................................................... 27 Figure 5-3 Single-level SDH+FE/GE networking............................................................................................. 29 Figure 5-4 Two-level SDH+FE/GE networking ................................................................................................ 30 Figure 5-5 Single-level SDH+STM-1 ATM networking ................................................................................... 32 Figure 5-6 Two-level SDH+STM-1 ATM networking ...................................................................................... 32 Figure 5-7 Integrated access in NGN ................................................................................................................ 34 Figure 5-8 Private circuit service....................................................................................................................... 35 Figure 5-9 Triple play application ..................................................................................................................... 36 Figure 6-1 Maintaining the UA5000 through the CLI....................................................................................... 37 Figure 6-2 Inband EMS networking .................................................................................................................. 41 Figure 6-3 Outband EMS networking ............................................................................................................... 42
Issue 02 (2006-11-01)
iii
Tables
Tables
Table 2-1 Description of the UA5000 broadband subsystems ............................................................................. 3 Table 2-2 Description of the UA5000 narrowband subsystem ............................................................................ 4 Table 3-1 Specification of the cabinets that can house the UA5000 frame.......................................................... 9 Table 3-2 Description of control cards............................................................................................................... 17 Table 3-3 Description of narrowband line cards ................................................................................................ 18 Table 3-4 Description of broadband line cards .................................................................................................. 19 Table 3-5 Description of broadband and narrowband combo line cards............................................................ 19 Table 3-6 Description of other cards.................................................................................................................. 20 Table 5-1 MSTP networking description ........................................................................................................... 26 Table 5-2 SDH+FE/GE networking description ................................................................................................ 28 Table 5-3 SDH+STM-1 ATM networking description....................................................................................... 31 Table 6-1 Configuration functions of UA5000 NE Manager............................................................................. 40 Table 7-1 Dimensions of the UA5000 cabinets ................................................................................................. 43 Table 7-2 Dimensions of the UA5000 frames.................................................................................................... 43 Table 7-3 Weights of the UA5000 cabinets ....................................................................................................... 44 Table 7-4 The running environment of the UA5000 in different cabinets ......................................................... 44 Table 7-5 Voltage specification of the power supply systems............................................................................ 44 Table 7-6 System performance specifications.................................................................................................... 45 Table 7-7 Types and numbers of the management interfaces............................................................................. 46 Table 7-8 Types and numbers of the network interfaces.................................................................................... 46 Table 7-9 Types and numbers of the user interfaces .......................................................................................... 47 Table 7-10 Technical specifications of the STM-1 optical port ......................................................................... 48 Table 7-11 Technical specifications of the 100Base-TX port ............................................................................ 48 Table 7-12 Technical specifications of the 100Base-FX port ............................................................................ 49 Table 7-13 Technical specifications of the 1000Base-SX port .......................................................................... 49 Table 7-14 Technical specifications of the 1000Base-LX port .......................................................................... 50
Issue 02 (2006-11-01)
Tables
UA5000 System Description Table 7-15 Technical specifications of the 1000Base-ZX port .......................................................................... 50 Table 7-16 Technical specifications of the E3 port ............................................................................................ 51 Table 7-17 Technical specifications of theT3 port ............................................................................................. 51 Table 7-18 Technical specifications of the ADSL port....................................................................................... 52 Table 7-19 Technical specifications of the ADSL2+ port .................................................................................. 52 Table 7-20 Technical specifications of the SHDSL port .................................................................................... 53 Table 7-21 Technical specifications of the VDSL port ...................................................................................... 53 Table 7-22 Technical specifications of the E1 port ............................................................................................ 54 Table 7-23 Technical specifications of the V.35 port ......................................................................................... 54 Table 7-24 Standards compliance ...................................................................................................................... 55
vi
Issue 02 (2006-11-01)
Related Versions
The following table lists the product versions related to this document. Product Name UA5000 Version IPMB V100R011 PVMB V100R011 N2000 V200R009
Intended Audience
The intended audience of this document is network planning engineers.
Issue 02 (2006-11-01)
Organization
This document consists of eight chapters and is organized as follows. Chapter 1 2 3 4 Overview Features and Benefits System Structure Service Implementation Description The major applications of the UA5000 in the network The features of the UA5000 and the services provided by the UA5000 The structure, including the cabinet, frames, and cards of the UA5000 The broadband and narrowband services provided by the UA5000 The typical network applications of the UA5000 Information on the system management and maintenance Technical specifications of the UA5000 as well as the standards the UA5000 complies with The anonyms and abbreviations in this manual
Conventions
Symbol Conventions
The following symbols may be found in this document. They are defined as follows. Symbol Description Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk which, if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation that, if not avoided, could cause equipment damage, data loss, and performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save you time.
Issue 02 (2006-11-01)
Symbol
Description Provides additional information to emphasize or supplement important points of the main text.
General Conventions
Convention Times New Roman Boldface Italic Courier New Description Normal paragraphs are in Times New Roman. Names of files, directories, folders, and users are in boldface. For example, log in as user root. Book titles are in italics. Terminal display is in Courier New.
Command Conventions
Convention Boldface Italic [] { x | y | ... } [ x | y | ... ] { x | y | ... } * Description The keywords of a command line are in boldface. Command arguments are in italic. Items (keywords or arguments) in square brackets [ ] are optional. Alternative items are grouped in braces and separated by vertical bars. One is selected. Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected. Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.
GUI Conventions
Convention Boldface > Description Buttons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK. Multi-level menus are in boldface and separated by the > signs. For example, choose File > Create > Folder.
Issue 02 (2006-11-01)
Keyboard Operation
Format Key Key 1+Key 2 Description Press the key. For example, press Enter and press Tab. Press the keys concurrently. For example, pressing Ctrl+Alt+A means the three keys should be pressed concurrently. Press the keys in turn. For example, pressing Alt, A means the two keys should be pressed in turn.
Key 1, Key 2
Mouse Operation
Action Click Double-click Drag Description Select and release the primary mouse button without moving the pointer. Press the primary mouse button twice continuously and quickly without moving the pointer. Press and hold the primary mouse button and move the pointer to a certain position.
Update History
Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions.
Issue 02 (2006-11-01)
1 System Overview
1
! ! !
System Overview
With an increasing demand in telecommunications services such as voice, data, video and multi-media, the need for an access network that can provide multiple large-capacity, high-speed and high-quality services has become imperative. Huawei UA5000 Universal Access Unit (referred to as the UA5000) allows you to construct an access network that keeps pace with the technological advances in the fiber access networks, broadband networks and the evolution of the Next Generation Network (NGN). The UA5000 meets both the current and the future customer requirements through its advanced technical features, such as: "IP+TDM" bus architecture V5 and AG concurrent uplink Manageable Triple Play
With these features, the UA5000 helps you to construct a multi-service access network at low cost.
Issue 02 (2006-11-01)
1 System Overview
Figure 1-1 shows the UA5000 in the overall solution. Figure 1-1 UA5000 in the overall solution
H.248 PSTN DDN ATM IP
E1
STM-1
FE/GE
H.248
STM-1/FE STM-1/FE/GE
MSTP
Access layer
CPE
V.24 V.35 E1
: UA5000
: Softswitch
Issue 02 (2006-11-01)
Upstream ports:
! ! ! ! ! !
Issue 02 (2006-11-01)
Function Supports:
! !
Upstream ports:
! ! ! ! !
Table 2-2 Description of the UA5000 narrowband subsystem Control card PVM Function Supports:
! !
POTS ISDN BRI ISDN PRI TDM SHDSL FE1 E1 V.35 V.24 Z FE E1
Upstream ports:
! !
Issue 02 (2006-11-01)
Function Supports:
! !
POTS ISDN BRI ISDN PRI TDM SHDSL 2/4-wire VF 64 k VF E&M Z FE1 E1 V.35 V.24 E1
Upstream port:
!
1984 for pure narrowband configuration 992 for pure broadband configuration 992 for narrowband and broadband combination configuration
The APMB card supports 5 Gbit/s ATM switching capability. The IPMB card supports 34 Gbit/s Ethernet switching capability. The PVM card supports 8 k x 8 k TDM switching capability. The backplane capacity reaches 100 Gbit/s. The IPMB card provides two GE upstream ports. The IPMB card supports 1024 multicast channels. The master frame, slave frame and extended frame are connected through high-speed star buses.
Issue 02 (2006-11-01)
GE ports for video services and a high-speed extended bus to guarantee non-blocking forwarding of video streams Fast switching between channels Channel preview function Audience statistics function Controlled channel access Connection to the Service Management System (SMS)/Operating Support System (OSS) through the transaction language 1 (TL1) interface on the EMS to support service auto provisioning Guaranteed Quality of Service (QoS) to forward video streams
Structure: supports the 2-layer structure: (the Optical Line Terminal (OLT) and the Optical Network Unit (ONU)), and the 1-layer structure (ONU independent). Topology: supports the ring, star and tree topologies, or a combination of them Broadband upstream interface: supports the ATM and IP upstream interfaces Bearing technology: supports the MSTP bearing technology Subtending: supports local subtending through a star bus, remote RSU8/RSU4 subtending through the E1 port, and remote ONU60A subtending through the TDM G.SHDSL port. (The remote ONU device accesses narrowband services only.)
Redundant backup of the control systems, switching fabrics, clocks, service processing modules and upstream line cards Multiple clock references Redundant fan configuration with intelligent control and alarm functions
Issue 02 (2006-11-01)
Redundant backup of the primary power supplies and the secondary power supplies. Both power supplies work in the load-sharing mode. The power supplies support the real-time monitoring and alarm function, and overvoltage and undervoltage protection. Load sharing of the Digital Signal Processing (DSP) resource of the PVM card
POTS line card and xDSL line cards with port backup capability. You can switch a faulty port to the backup port to resume the service.
Modularization and platform design Advanced design technologies based on the object, error tolerance, error correction and auto recovery Capability maturity model (CMM) compliance
1+1 backup of the broadband star bus for local subtending MSTP networking to prevent single point of failures 1+1 Automatic Protection Switching (APS) protection for the STM-1 ports Rapid Spanning Tree Protocol (RSTP) protection and trunk for FE/GE ports Sub-network Connection Protection (SNCP) and Multiplex Section Protection (MSP) of Synchronous Digital Hierarchy (SDH) ports Support of dual homing. One UA5000 can register in two SoftSwitches. If one SoftSwitch is faulty, the UA5000 switches over to the other. The switchover will not affect the calls in progress.
Capacities ranging from dozens of ports to thousands of ports Indoor and outdoor cabinets for mild and harsh climates Large and small sized (cabinet, chassis and desktop) units Front-access and rear-access cabinets A wide variety of terminals
Issue 02 (2006-11-01)
Uniform management mode: The iManager N2000 provides a centralized management for the narrowband and broadband services of the UA5000. Rich interfaces: The iManager N2000 provides various southbound interfaces such as Telnet, Man Machine Language (MML) and Simple Network Management Protocol (SNMP) to connect to the managed devices. It also provides standard SNMP and TL1 northbound interfaces to connect to the OSS. The iManager N2000 helps the carriers to build an integrated and automatic OSS platform at the network layer. Security management: The iManager N2000 provides abundant user management and authentication functions down to the shelves and cards of the managed devices. In-service upgrade and maintenance: The iManager N2000 supports the online reporting of hardware and software versions, supports the in-service upgrade and loading of card software and host software, as well as the in-service loading and management of patches. Environment monitor: The environmental monitoring unit (EMU) carries out the real-time monitoring and generates remote alarms with regard to humidity, temperature, access control sensors and power systems. Performance measurement: The iManager N2000 provides the functions to collect, query and analyze the performance data. Uniform management of terminals: the iManager N2000 provides the functions to configure, test and monitor the ADSL/ADSL2+ and ATM G.SHDSL terminals in centralized mode. This function helps the carriers to reduce the maintenance cost.
! !
! !
Issue 02 (2006-11-01)
3 System Structure
3
3.1 Cabinets
Model Type
System Structure
This section describes the cabinets, frames and cards of the UA5000.
Table 3-1 lists the cabinets that can house the UA5000 frame. Table 3-1 Specification of the cabinets that can house the UA5000 frame Frame configuration Max. ports POTS only 384 960 1408 ADSL only 192 480 704 POTS & ADSL combo 192 480 704
One HABD One HABD + one HABF One HABD + one HABF + one HABE One HABD + one HABF + one HABD
1344
672
672
ONU-F02A
Indoor, rear-access
One HABA One HABA+ one HABB One HABA+ one HABA One HABC One HABC+ one HABC
Issue 02 (2006-11-01)
3 System Structure
Model
Type
Frame configuration
Max. ports POTS only 960 1984 ADSL only 480 992 POTS & ADSL combo 480 992
ONU-F02AF
Indoor, front-access
One HABD+ One HABF One HABD+ two HABFs+ one HABE One HABD+ two HABFs+ one HABD
1920
960
960
3.2 Frames
There are two types of frames. One is a front-access frame and the other is the rear- access frame. This section describes the frame types.
HABA frame
!
The HABA frame is the master frame of the rear-access UA5000, which stands at a height of 16 U (1 U = 44.55 mm). The HABA frame can subtend slave frames and aggregate services from the subordinate frames. The HABA frame provides 36 slots, of which 30 are available for line cards and 6 for the other types of cards. However, if you are using the AIUB and TSSB, you must insert the AIUB cards and the TSSB card in the positions shown in Figure 3-1. The remaining six slots are reserved for other types of cards. You can insert narrowband line cards and broadband line cards in any of the 30 line card slots. The two narrowband control cards and the two broadband control cards in the frame support backup in the event of a primary controller failure. The HABA frame can use a minimum of one and a maximum of two PWX cards. The two PWX cards in the frame share the power supply load, and if one PWX fails, the other has the capacity to dynamically provide the necessary power. The HABA can also serve as a slave frame. In this case, the HABA frame is equipped with only broadband control cards and as many as 30 line cards.
! ! !
10
Issue 02 (2006-11-01)
3 System Structure
Figure 3-1 shows the layout of the HABA frame. Figure 3-1 HABA frame layout
Fan
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
x x P P P P W W M M X X B B
P V x / R S U x
P V x / R S U x
A I U B / x S L
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
x x x x x x x x x x x x x x x x x x S S S S S S S S S S S S S S S S S S L L L L L L L L L L L L L L L L L L
PWX: Secondary power supply card xPMB: Broadband control card (APMB/IPMB) PVx: Narrowband control card (PVU8/PVU4/PVM) RSUx: Remote subscriber unit (RSU8/RSU4) AIUB: ATM interface card xSL: Service line card (ASL/DSL/ADMB/VDLA/) TSSB: Test card
HABC frame
! ! ! ! !
The HABC frame is the master of the rear-access UA5000, which stands at a height of 8 U (1 U = 44.55 mm). The HABC frame provides 18 slots, of which 12 are available for line cards. The TSSB card must be inserted in the position shown in Figure 3-2. You can insert narrowband line cards and broadband line cards in any of the 12 line card slots. The two narrowband control cards and the two broadband control cards in the frame support backup in the event of a primary controller failure. The two PWX cards in the frame share the power supply load, and if one PWX fails, the other has the capacity to dynamically provide the necessary power.
Issue 02 (2006-11-01)
11
3 System Structure
Figure 3-2 shows the layout of the HABC frame. Figure 3-2 HABC frame layout
FAN 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 P V I I x P P P P / W W M M R X X B B S U x P V x x / S R L S U x T S S x x x x x x x x x x x S S S S S S S S S S / L L L L L L L L L L x S L Cabling area
PWX: Secondary power supply card IPMB: Broadband control card PVx: Narrowband control card (PVU8/PVU4/PVM) RSUx: Remote subscriber unit (RSU8/RSU4) xSL: Service line card (ASL/DSL/ADMB/VDLA/SDLB) TSSB: Test card
HABD frame
!
The HABD frame is the master frame of the front-access UA5000, which stands at a height of 10 U. The HABD frame can be subtended with multiple slave frames, and the HABD frame can aggregate the services from the subordinate frames. The HABD provides 18 slots, of which 12 are available for line cards. However, if you are using the AIUB and TSSB, you must insert the AIUB cards and the TSSB card in the positions shown in Figure 3-3. The remaining six slots are for other types of cards. You can insert narrowband line cards and broadband line cards in any of the 12 line card slots. The two narrowband control cards and the two broadband control cards in the frame support backup in the event of a primary controller failure. The HABD frame can use a minimum of one and a maximum of two PWX cards. The two PWX cards in the frame share the power supply load, and if one PWX fails, the other has the capacity to dynamically provide the necessary power. The HABD can also serve as a slave frame. In this case, the HABD frame is equipped with only broadband control cards and as many as 12 line cards.
! ! !
12
Issue 02 (2006-11-01)
3 System Structure
Figure 3-3 shows the layout of the HABD frame. Figure 3-3 HABD frame layout
Fan
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
x x P P P P W W M M X X B B
P V x/ R S U x
P V x/ R S U x
A I U B / x S L
T A S I S U x x x x x x x x x B B S S S S S S S S S / / L L L L L L L L L x x S S L L
Cable routing area Control & interconnect cable connecting area Line card cable connecting area
PWX: Secondary power supply card xPMB: Broadband control card (APMB/IPMB) PVx: Narrowband control card (PVU8/PVU4/PVM) RSUx: Remote subscriber unit (RSU8/RSU4) xSL: Service line card (ASL/DSL/ADMB/VDLA/) AIUB: ATM interface card TSSB: Test card
HABE frame
! ! ! !
The HABE frame is the slave frame of the front-access UA5000, which stands at a height of 10 U. The HABE frame operates under the control of the HABD frame. The HABE frame can be subtended with the HABF frame. The HABE frame provides 18 slots, of which 14 are reserved for line cards and 4 for other types of cards. You can insert narrowband line cards and broadband line cards as desired. The two broadband control cards in the frame support backup in the event of a primary controller failure. The HABE frame does not have narrowband control cards. The narrowband line cards in the frame are controlled by the narrowband control card in the HABD frame. The HABE frame can use a minimum of one and a maximum of two PWX cards. The two PWX cards in the frame share the power supply load, and if one PWX fails, the other has the capacity to dynamically provide the necessary power.
Issue 02 (2006-11-01)
13
3 System Structure
Figure 3-4 shows the layout of the HABE frame. Figure 3-4 HABE frame layout
Fan
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
A A x x x x x x x x x x x x x x P P P P S S S S S S S S S S S S S S W W S S L L L L L L L L L L L L L L X X B B
Cable routing area Control & interconnect cable connecting area Line card cable connecting area
PWX: Secondary power supply card APSB: Broadband control card for the slave frame xSL: Service line card (ASL/DSL/ADMB/VDLA/)
HABF frame
! ! !
The HABF frame is the extended frame of the front-access UA5000, which stands at a height of 10 U. The HABF frame operates under the control of either the HABD frame or the HABE frame. The serving HABD or HABE frame provides the power supply to the HABF frame. The HABF frame provides 18 slots. You can insert narrowband line cards and broadband line cards as desired.
14
Issue 02 (2006-11-01)
3 System Structure
Figure 3-5 shows the layout of the HABF frame. Figure 3-5 HABF frame layout
Fan
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
x x x x x x S S S S S S L L L L L L
x x x x x x x x x x x x S S S S S S S S S S S S L L L L L L L L L L L L
Cable routing area Interconnect cable connecting area Line card cable connecting area
HABL frame
! !
The HABL shelf, which stands at a height of 10 U, is the mini master shelf. The HABL shelf provides 12 slots, of which 6 are available for line cards. You can insert the narrowband line cards and broadband line cards as desired. The shelf supports up to three 32-port ADSL/ADSL2+ line cards, three POTS and ADSL/ADSL2+ combo line cards, or five other line cards. The two narrowband control cards and the two broadband control cards in the shelf support backup in the event of primary controller failures. The two PWX cards in the frame share the power supply load, and if one PWX fails, the other has the capacity to dynamically provide the necessary power.
! !
Issue 02 (2006-11-01)
15
3 System Structure
Figure 3-6 shows the layout of the HABL frame. Figure 3-6 HABL frame layout
FAN 00 01 02 03 04 05 06 07 08 09 10 11 P V I I x P P P P / W W M M R X X B B S U x P V x x / S R L S U x T S x x x x S S S S S B L L L L / x S L
PWX: Secondary power supply card IPMB: Broadband control card PVx: Narrowband control card (PVU8/PVU4/PVM) RSUx: Remote subscriber unit (RSU8/RSU4) xSL: Service line card (ASL/DSL/ADMB/SDLB) TSSB: Test card
16
Issue 02 (2006-11-01)
3 System Structure
3.3 Cards
Table 3-2, Table 3-3, Table 3-4, Table 3-5 and Table 3-6 describe the details of the cards used in the UA5000. Table 3-2 Description of control cards Abbr. name APMB Full name Master frame ATM service processing card Function description The APMB card is also called the broadband control card for ATM signaling. The APMB card:
! !
Controls the broadband line cards Provides various types of upstream ports for broadband services, including IMA E1, ATM E3, ATM T3 and STM-1 ATM, Supports active/standby backup Provides the switch fabric and working clock for broadband services
! !
IPMB
The IPMB card is also called the broadband control card for IP signaling. The IPMB card:
! ! ! !
Controls the broadband line cards Aggregates and processes broadband services Provides GE/FE ports Supports active/standby backup Processes the H.248 protocol Converts the TDM voice signals into IP packets Provides one FE port to transmit the VoIP service
PVM
PVU8/PVU4
The PVU8/PVU4 is also called the master frame narrowband control card. The PVU8/PVU4 card:
! !
Controls the narrowband line cards Provides upstream V5 E1 ports for TDM services Provides TDM switch fabric and working clock for TDM services Supports the active/standby backup
Issue 02 (2006-11-01)
17
3 System Structure
Controls the broadband line cards in the slave frame Subtends the broadband services with the master frame Supports the active/standby backup Controls the narrowband line cards in the remote subscriber frame Subtends the narrowband services with the UA5000 master frame or the MD5500 frame Provides upstream E1 ports for narrowband services Supports the active/standby backup Serves the ONU-60A multi-service access unit Connects the G.SHDSL interface card on the central office side to forward the primary and secondary node signaling Manages the secondary nodes
RSU8/RSU4
RSUG
Table 3-3 Description of narrowband line cards Short name ASL A32 DSL VFB CDI SDL
SDLE
Full name POTS line card POTS line card ISDN BRI line card 2/4-wire VF line card Direct dial-in line card SHDSL line card TDM G.SHDSL line card
Function description Provides 16 POTS ports Provides 32 POTS ports Provides 8 ISDN BRI ports Provides 16 2-wire VF ports or 8 4-wire VF ports Provides 16 DDI ports Provides 4 TDM SHDSL ports and 4 E1 ports
Provides 8 TDM G.SHDSL ports and 8 E1 ports
18
Issue 02 (2006-11-01)
3 System Structure
Table 3-4 Description of broadband line cards Short name SDLB ADLB Full name SHDSL line card ADSL line card Function description The SDLB card supports:
!
16 ATM SHDSL ports 16 ADSL ports a built-in splitter 16 ADSL/ADSL2+ ports a built-in splitter 16 ADSL/ADSL2+ ports A built-in splitter 16 VDSL ports a built-in splitter external line test CO emulation on port 0 8 Ethernet ports
ADMB
ADMC
VDLA
EAUA
Table 3-5 Description of broadband and narrowband combo line cards Abbr. Name CSMB Full name ADSL/ADSL2+ and POTS combo line card Function description The CSMB card supports:
! ! !
16 ADSL/ADSL2+ ports 16 POTS ports a built-in splitter 16 ADSL ports 16 POTS ports a built-in splitter
CSLB
Issue 02 (2006-11-01)
19
3 System Structure
Table 3-6 Description of other cards Abbr. Name AIUB Full name ATM interface card Function description The AIUB card carries out remote subtending of the UA5000. An AIUB card supports:
!
2 STM-1 ATM ports, 2 ATM E3 ports or 2 ATM T3 ports 8 IMA E1 ports through backplane 1 + 1 card-level protection 16 E1 ports unstructured CES
! !
DEHA
The EDTB card supports16 E1 trunk ports The TSSB and TSSC cards are used to test the narrowband and broadband line cards. TSSC card supports Tx and Rx of 1 kHz signal tone. The ESC card controls or monitors:
! ! ! ! ! !
temperature humidity door sensor fan status battery status power supply status
This card reports the above information to the control card through a serial port. PWX Secondary power supply card The PWX card occupies one slot. A frame can use a minimum of one and a maximum of two PWX cards. The PWX cards support inter-card and inter-frame load-sharing.
20
Issue 02 (2006-11-01)
4 Service Implementation
4
4.1 PSTN Voice Services
Service Implementation
The UA5000 supports multiple services including voice, broadband and private circuit through different main control cards. The PVM or PVU card supports the voice and narrowband private circuit services, the APMB or IPMB card supports the broadband access and broadband private circuit services, and the PVM card supports the Voice over IP (VoIP) services.
The UA5000 supports the standard V5.1 and V5.2 protocols, and provides E1 ports to connect to Local Exchanges (LEs) to access PSTN services. The major features of the PSTN voice service are as follows:
POTS
The UA5000 provides POTS ports to support the access of analog subscribers and PBXs. The UA5000 supports supplementary services such as Central Exchange (CENTREX) and Caller Identification Display (CID).
ISDN
The UA5000 provides ISDN BRI (2B+D) ports and ISDN PRI (30B+D) ports, and supports various N-ISDN services, including:
! ! ! ! ! ! !
Video conferencing Videotext G4 facsimile E-mail Data retrieval LAN interconnection Internet access
Issue 02 (2006-11-01)
21
4 Service Implementation
The UA5000 also supports ISDN supplementary services. These ISDN supplementary services include:
! ! !
Direct dial-in (DDI) Multi-subscriber number (MSN) Calling line identification presentation (CLIP)
The UA5000 supports a mixed configuration of ISDN subscribers and analog telephone subscribers.
Direct-Dial-In
The UA5000 provides DDI subscriber ports to support the subscriber line extension service. This service enables the external analog subscriber ports of other exchanges to be transparently extended inside the access network.
VoIP services for POTS subscribers VoIP services for ISDN BRI subscribers Fax over IP (FoIP) in the G.711 transparent transmission mode FoIP in the T.38 mode Modem over IP (MoIP) in the transparent transmission mode DDI services
The major features of the next generation voice services are as follows:
! ! ! ! ! !
Supports all PSTN basic services, complementary services, and intelligent services Supports the G.711 (a-law/ -law), G.723.1 and G.729 (A/B) codecs Supports the emergency standalone capability Supports echo cancellation complying with ITU-T G.165/G.168 Supports pulse metering and polarity reversal metering Provides QoS assurance for voice traffics with functions including priority queuing, jitter buffering, IP Type of Service (ToS), Differentiated Service Code Point (DSCP), and 802.1Q VLAN Supports separate gain control of the transmission and reception streams
22
Issue 02 (2006-11-01)
4 Service Implementation
IP interface including FE and GE ATM interface including STM-1 ATM, ATM E3, ATM T3 and IMA E1
Subscriber isolation at layer 2 through VLAN Subscriber isolation within Smart VLAN Host number restriction of each port Port searching by a MAC address Binding of a MAC address and a port Binding of an IP address and a port MAC address filtering Controlled number of multicast groups to access a port Standard ACL and extended ACL, ACL for data link frames and user-defined ACL DHCP Option82 to identify subscribers
DHCP relay ARP proxy PPPoE+ DHCP Option82 Protocol conversion between IPoA and IPoE Protocol conversion between PPPoA and PPPoE ACL RIP OSPF
Issue 02 (2006-11-01)
23
4 Service Implementation
QoS features
The UA5000 supports the following QoS features:
! ! ! ! !
Packet forwarding based on 802.1p priority to provide appropriate QoS for different services IP priority labeling or DSCP priority labeling for packets matching the ACL rules Port-based, connection-based and VLAN-based flow control Congestion control Queue scheduling
Local and remote DDN access through DDN ports such as E1, V.35, V.24, SHDSL (in the TDM mode) and 2/4-wire VF 2/4-wire SHDSL access through ATM SHDSL ports Private circuit data at a symmetric rate of 10 Mbit/s within 1.5 km through VDSL ports Broadband private circuit LAN interconnection through FE ports
Non-blocking forwarding of video services by a GE video port and a dedicated high-speed multicast bus 1024 multicast channels Processing of 400 concurrent user requests per second Receiving multicast streams and unicast streams from one or more network ports Distributing multicast streams through the Metropolitan Area Network (MAN) or the Video Distribution Network (VDN) Internet Group Management Protocol (IGMP) Proxy, IGMP V1 and V2 Fast switching between channels Channel preview and audience statistics Controlled channel access right, channel number, channel preview right, preview duration and preview times Guaranteed QoS to forward the video streams
24
Issue 02 (2006-11-01)
5 Networking Applications
Networking Applications
The UA5000 adapts to various access network scenarios. You can use the UA5000 in complex topologies and challenging engineering environments. You can select the most suitable networking solution based on the requirements of transmission resources, ATM/IP network resources, service types, QoS and security. The following lists the equipment icons used in the networking diagrams below. Add/Drop Multiplexer (ADM) Terminal Multiplexer (TM) UA5000 MD5500
SoftSwitch
Issue 02 (2006-11-01)
25
5 Networking Applications
Networking description
Table 5-1 describes the MSTP networking. Table 5-1 MSTP networking description Item Upper layer network Access network topology Access network equipment Service stream Description PSTN, DDN and IP Ring, ring with chain, and tangent ring MSTP equipment, UA5000 and MD5500 (optional) Broadband services and narrowband services are accessed and transmitted together. Services are sent to the PSTN, DDN or IP network on the central office side through the MSTP. The VoIP services are sent to the IPMB card through an FE port of the PVM card, and then to the MSTP equipment through an FE or GE port of the IPMB.
Based on the aggregation state of the narrowband services, MSTP networking falls into two modes: single-level networking and two-level networking.
!
Single-level networking
The UA5000 at the remote end sends the narrowband and broadband services to the central office through the MSTP transmission ring. The central office forwards the services to the BRAS/L3, PSTN switch or DDN node without convergence.
!
Two-level networking
The narrowband services are sent to the PSTN or DDN through the MD5500 or UA5000 at the central office. When there are many remote nodes and subscribers, select the MD5500 in the central office to converge services. When there are a few remote nodes and subscribers, select the UA5000 to converge services.
26
Issue 02 (2006-11-01)
5 Networking Applications
The broadband services are aggregated and forwarded to the BRAS/L3 by the transmission equipment at the central office.
Networking diagram
Figure 5-1 and Figure 5-2 show the MSTP networking. You can replace the MD5500 in Figure 5-2 with a UA5000. Figure 5-1 Single-level MSTP networking
H.248 PSTN DDN FE/GE H.248 IP
E1( V5)
E1
FE/GE MSTP E1
FE/GE E1
FE/GE MSTP E1
FE/GE E1
MSTP E1 FE/GE
FE/GE H.248
Issue 02 (2006-11-01)
27
5 Networking Applications
Networking features
The MSTP networking has the following features:
! ! ! !
Suitable for the scenarios where the narrowband E1 and the broadband FE/GE resources coexist Saving the optical fibers by accessing and transmitting both the narrowband and broadband services Supporting multiple capacity specifications to meet various networking requirements Suitable for the IPTV service deployment
Networking description
Table 5-2 describes the SDH+FE/GE networking. Table 5-2 SDH+FE/GE networking description Item Upper layer network Access network topology Access network equipment Service stream Description PSTN, DDN and IP Narrowband: ring, ring with chain, and tangent rings Broadband: star SDH equipment, UA5000 and MD5500 (optional) Broadband and narrowband services are accessed together but transmitted separately. Narrowband services are transmitted to the central office through the SDH network, and then upstream to PSTN and DDN. The broadband services are transmitted to the upper-layer network through the FE ports of the IPMB card. The VoIP services are sent to the IPMB card from the PVM card through its internal FE port. The services are then sent to the MSTP equipment through an FE or GE port of the IPMB.
The SDH+FE/GE networking falls into two modes: single-level networking and two-level networking.
!
Single-level networking
The narrowband and broadband services are sent to the BRAS/L3, PSTN switch or DDN node directly. Neither of them is aggregated within the access network.
!
Two-level networking
The MD5500 or the UA5000 at the central office aggregates the narrowband services and then sends them to PSTN or DDN.
28
Issue 02 (2006-11-01)
5 Networking Applications
When there are many remote nodes and subscribers, select the MD5500 in the central office to aggregate the V5 interfaces. When there are a few remote nodes and subscribers, select the UA5000 in the central office to aggregate the V5 services. The broadband services are sent to the IP network through the FE or GE ports directly.
Networking diagram
Figure 5-3 and Figure 5-4 show the SDH+FE/GE networking. You can replace the MD5500 in Figure 5-4 with a UA5000. Figure 5-3 Single-level SDH+FE/GE networking
H.248 PSTN DDN IP
E1
FE/GE
FE/GE H.248
SDH E1
SDH E1 E1
Issue 02 (2006-11-01)
29
5 Networking Applications
SDH E1
SDH E1 E1
Networking features
The SDH+FE/GE networking has the following features:
! ! !
Suitable for the consolidation of the networks with the SDH equipment or the construction of a new access network with abundant optical fibers. The broadband service channel is separated from the narrowband service channel, while their EMS channels are integrated. Suitable for the IPTV service deployment thanks to the direct GE/FE connection with IP MAN.
30
Issue 02 (2006-11-01)
5 Networking Applications
Networking description
Table 5-3 describes the SDH+STM-1 ATM networking. Table 5-3 SDH+STM-1 ATM networking description Item Upper layer network Access network topology Access network equipment Service stream Description PSTN, DDN and ATM Narrowband: ring, ring with chain, and tangent rings Broadband: star SDH equipment, UA5000 and MD5500 (optional) Broadband and narrowband services are accessed together but transmitted separately. The narrowband services are transmitted to the central office through the SDH network, and then upstream to PSTN and DDN. The broadband services are transmitted to the upper-layer network through an STM-1 port of the APMB card.
The SDH+STM-1 ATM networking falls into two modes: single-level networking and two-level networking.
! !
In the single-level networking, neither narrowband nor broadband services are aggregated within the access network. In the two-level networking, the central office aggregates the services from the V5 and ATM interfaces and then sends them to PSTN or ATM network.
Issue 02 (2006-11-01)
31
5 Networking Applications
Networking diagram
Figure 5-5 and Figure 5-6 show the SDH+STM-1 ATM networking. Figure 5-5 Single-level SDH+STM-1 ATM networking
PSTN DDN ATM
E1( V5)
E1
STM-1 STM-1
STM-1
SDH E1 E1
SDH E1 E1 E1
E1(V5)
STM-1
STM-1
STM-1
E1
SDH
E1
E1
32
Issue 02 (2006-11-01)
5 Networking Applications
Networking features
The SDH+ STM-1 ATM networking has the following features:
! !
Suitable for the networks with the SDH equipment, ATM switches and abundant optical fibers. The broadband service channel is separated from the narrowband service channel, while their EMS channels are integrated.
The access of broadband and narrowband services over the same copper wire The access of VoIP, FoIP and MoIP under the control of a SoftSwitch The ISDN BRA and ISDN PRA services The ADSL broadband network access and SHDSL broadband private circuit interconnection services
Issue 02 (2006-11-01)
33
5 Networking Applications
Internet
SoftSwitch BRAS
SHDSL
ADSL2+
ISDN BRI
ISDN PRI
Modem Modem
Splitter NT1
PBX
SHDSL
ADSL
POTS/VoIP FAX
ISDN BRA
ISDN PRA
The narrowband private circuit interconnection of narrowband services through E1 and V.35 interfaces provided by TDM SHDSL The high speed private circuit interconnection through broadband ports such as FE and ATM SHDSL QinQ VLAN and VLAN stacking for broadband services
34
Issue 02 (2006-11-01)
5 Networking Applications
DDN/SDH
IP
E1/STM-1
V.35
E1 TDM SHDSL
Modem
Modem
DDN node
DTE
Branch 1
Branch 2
The access of both the broadband and narrowband services over the same copper wire Appropriate QoS schemes for different services IP TV service through the IGMP proxy and managed multicast mechanism
Issue 02 (2006-11-01)
35
5 Networking Applications
IP MAN
L2/L3
VoIP
Internet access
IP TV
36
Issue 02 (2006-11-01)
6 Equipment Management
6
Serial port Ethernet port
Equipment Management
COM ETH
UA5000
Issue 02 (2006-11-01)
37
6 Equipment Management
Topology management Performance monitoring and traffic measurement Fault management Security management Batch service provisioning Backup and uploading of NE data Database management Environment and power supply monitoring Configuration management
Topology management
The iManager N2000 can display the network elements (NE) in the whole network in one topology view. Through a unified management platform, it can monitor and manage all NEs in the network. This simplifies network maintenance.
38
Issue 02 (2006-11-01)
6 Equipment Management
Fault management
The iManager N2000 offers an overall network alarm management solution, enabling fast fault locating and troubleshooting. In addition, to simplify the troubleshooting, the iManager N2000 supports window switching. For example, it allows shift from the topological window to the alarm window, or shift from the alarm window to the faulty port.
Security management
The iManager N2000 manages the network based on different user authorities and different domains. It can divide users authorities based on users, user groups, operations, applications or ACLs. It can enable automatic lock, forced disconnection and user operation logging on the clients.
Database management
The iManager N2000 provides a tool to carry out the backup and recovery of the EMS database. This enhances security of the system data. The iManager N2000 also provides a monitoring terminal to monitor the running status of the EMS server and the usage of the EMS database. In addition, the iManager N2000 supports the remote dual system backup scheme to ensure the database safety.
Issue 02 (2006-11-01)
39
6 Equipment Management
Configuration management
The EMS provides multiple configuration functions for the UA5000. Refer to Table 6-1 for details. Table 6-1 Configuration functions of UA5000 NE Manager Function feature Device management Description The NE manager manages the hardware of the device, including shelves, cards and ports. Through the NE manager, you can display the panel, maintain the system, cards and ports, as well as measure the physical resources. ADSL/ADSL2+ management The NE manager enables you to:
!
Query, configure and maintain the ADSL or the ADSL2+ port information and statuses Manage the profiles of the ADSL or the ADSL2+ port Monitor and measure the port traffic Configure the IP address of a terminal Configure the terminal profile Query the detailed information about a terminal Ping a terminal Restart a terminal Query, configure and maintain SHDSL port information and statuses Manage SHDSL port profiles Add the MUX VLAN, Smart VLAN, and Standard VLAN Configure auxiliary ports and service virtual ports Query VLAN information Configure, activate and query Ethernet ports Add, configure, activate and query aggregated Ethernet ports Add service ports for ATM ports, ADSL ports, G.SHDSL ports, and VDSL ports. Configure service port attributes, including physical ports and the maximum number of MAC addresses.
! !
Terminal management
SHDSL management
VLAN management
Ethernet management
40
Issue 02 (2006-11-01)
6 Equipment Management
Description The NE manager enables you to configure and query global parameters, users, upstream ports, and programs of the IGMP Proxy. You can also manage and provision the managed video services.
Inband networking
Inband networking means that the management is carried out using the service transmission channel of the UA5000. In this fashion, the EMS messages are transmitted through the service channel. Figure 6-2 shows the inband EMS networking. Figure 6-2 Inband EMS networking
EMS Client EMS Client
EMS Server
IP
UA5000
UA5000
Advantage: The networking is flexible, and does not require additional devices. It saves cost. Disadvantage: When the service channel is interrupted, network management cannot be carried out.
Issue 02 (2006-11-01)
41
6 Equipment Management
Outband networking
Outband networking means that the management is carried out using a channel separated from the service channel. Figure 6-3 shows the outband EMS networking. Figure 6-3 Outband EMS networking
Management side Service side
IP
Advantage: The EMS channel is more reliable than that of the inband EMS. When the service channel is interrupted, you can still manage the UA5000 through the outband EMS. Disadvantage: Additional devices are required to set up an EMS channel separated from the service channel.
42
Issue 02 (2006-11-01)
7 Technical Specifications
7
7.1 Equipment Parameters
7.1.1 Dimensions
Cabinet ONU-F01D200 ONU-F01D500 ONU-F01D1000 ONU-F02A ONU-F02AF
Technical Specifications
Table 7-1 Dimensions of the UA5000 cabinets Dimension (W x D x H, in mm) 1250 x 550 x 1200 1550 x 550 x 1550 1900 x 550 x 1650 600 x 600 x 2200 600 x 600 x 2200
Table 7-2 Dimensions of the UA5000 frames Frame HABC HABL HABA HABB HABD HABE HABF Dimensions (W x D x H, in mm) 482 x 445 x 352.8 310 x 370 x 444 482 x 445 x 711 482 x 445 x 711 482 x 370 x 444 482 x 370 x 444 482 x 370 x 444
Issue 02 (2006-11-01)
43
7 Technical Specifications
7.1.2 Weights
Table 7-3 Weights of the UA5000 cabinets Cabinet ONU-F01D200 ONU-F01D500 ONU-F01D1000 ONU-F02A ONU-F02AF Weight (fully-populated, in kg) 370 (with two battery groups weighing 120 kg) 550 (with two battery groups weighing 200 kg) 850 (with two battery groups weighing 200 kg) 250 260
44
Issue 02 (2006-11-01)
7 Technical Specifications
Broadband (using the APMB card) ATM switch capacity Maximum number of PVCs in one frame Maximum number of PVPs in one frame Maximum number of STM-1 ports Maximum number of ATM E3 ports Maximum number of ATM T3 ports Maximum number of IMA E1 ports Maximum number of CES E1 ports 5 Gbit/s 8000 4000 APMB: 2 AIUB: 2 APMB: 2 AIUB: 2 APMB: 2 AIUB: 2 APMB: 8 AIUB: 8 APMB: 8 Each DEHA: 16 (A frame supports two DEHA cards.)
Issue 02 (2006-11-01)
45
7 Technical Specifications
Item Broadband (using the IPMB card) Ethernet switching capacity Forwarding capacity Maximum number of GE ports Maximum number of FE ports VLAN number 802.1p priority MAC address number Multicast group number Typical forward delay Clock Clock stratum Backplane Backplane bus capacity
Index
34 Gbit/s Wire speed forwarding 2 The IPMB card provides six ports, and each EAUA card provides eight ports. 4k Recognizing the 802.1p tag, and supporting eight priorities and four PQ queues scheduling. 16 k 1k 40 s
Stratum 3
100 Gbit/s
Table 7-8 Types and numbers of the network interfaces Interface type TDM E1 Provided by PVU8/RSU8 PVU4/RSU4 IMA E1 ATM E3 APMB/AIUB APMB/AIUB Number per card 8 4 8 2
46
Issue 02 (2006-11-01)
7 Technical Specifications
IPMB IPMB
Table 7-9 Types and numbers of the user interfaces Interface type POTS Provided by ASL/CSMB A32 (CC0HASL / CC0RASL / CC0NASL) ISDN BRI ISDN PRI 2B1Q DSL EDTB DSL EDTB CES E1 DEHA APMB V.24 2-wire VF port 4-wire VF port FXO ADSL ADSL2+ VDSL TDM SHDSL Through MTA VFB VFB CDI CSLB/ADLB ADMB/ADMC/CSMB VDLA H303HSL H521SDL ATM SHDSL FE SDLB EAUA Number per card 16 32 8 16 8 16 16 8 3 16 8 16 16 16 16 2 4 16 8
Issue 02 (2006-11-01)
47
7 Technical Specifications
7.3.2 100Base-TX
Table 7-11 Technical specifications of the 100Base-TX port Parameter Transmission rate Interface type Transmission distance Interface mode Cable type Differential mode output voltage Duty ration extortion Output jitter Specification 10 Mbit/s and 100 Mbit/s compatible RJ-45 (TPI) 100 m UTP/STP Category-5 twisted pair 1165 mV1285 mV (STP) 950 mV1050 mV (UTP) Less than 0.5 ns Less than 0.5 ns
48
Issue 02 (2006-11-01)
7 Technical Specifications
Specification 230 MHz 3060 MHz 6080 MHz >16 dB >16 - 20log(f/30) dB (f-frequency, in MHz) >10 dB
The input end can sustain the sine common mode interference of 0125 MHz, 1.0 Vpp IEEE 802.3u
7.3.3 100Base-FX
Table 7-12 Technical specifications of the 100Base-FX port Parameter Transmission rate Interface type Interface mode Transmission distance (km) Central wavelength (nm) Mean transmit power (dBm) Extinction ratio (dB) Receiver sensitivity (dBm) Receiver overload power (dBm) Standard compliance Specification 100 Mbit/s LC Multi-mode 2 1310 19 to 14 10 < 30 14 IEEE 802.3u Single mode 15 1310 15 to 8 8.2 < 31 8 Single mode 40 1310 5 to 0 8.2 < 36 8
7.3.4 1000Base-SX
Table 7-13 Technical specifications of the 1000Base-SX port Parameter Transmission rate Interface type Interface mode Transmission distance (m) Average transmit power (dBm) Specification 1000 Mbit/s LC Multi-mode 500 9.5 to 4
Issue 02 (2006-11-01)
49
7 Technical Specifications
Parameter Central wavelength (nm) Extinction ratio (dB) Receiver sensitivity (dBm) Receiver overload power (dBm) Standard compliance
7.3.5 1000Base-LX
Table 7-14 Technical specifications of the 1000Base-LX port Parameter Transmission rate Interface type Interface mode Transmission distance (km) Central wavelength (nm) Average transmit power (dBm) Extinction ratio (dB) Receiver sensitivity (dBm) Receiver overload power (dBm) Standard compliance Specification 1000 Mbit/s LC Single mode 10 1310 11 to 3 8.2 < 19 3 IEEE 802.3z
7.3.6 1000Base-ZX
Table 7-15 Technical specifications of the 1000Base-ZX port Parameter Transmission rate Interface type Interface mode Transmission distance (km) Central wavelength (nm) Average transmit power (dBm) Specification 1000 Mbit/s LC Single mode 40 1550 5 to 0 80 1550 3 to 2
50
Issue 02 (2006-11-01)
7 Technical Specifications
Parameter Extinction ratio (dB) Receiver sensitivity (dBm) Receiver overload power (dBm) Standard compliance
7.3.7 E3
Table 7-16 Technical specifications of the E3 port Parameter Transmission rate Line code Line jitter Maximum transmission distance Input/output impedance Standard compliance Specification 34.368 Mbit/s HDB3 Comply with ITU-T G.823, G.824 and ETSI-TBR-2 standards 1200 feet/366 m 75 ITU-T G.703, ITU-T G.704 and ITU-T G.823
7.3.8 T3
Table 7-17 Technical specifications of theT3 port Parameter Transmission rate Line code Line jitter Maximum transmission distance Input/output impedance Standard compliance Specification 44.736 Mbit/s B3ZS Comply with ITU-T G.823 and G.824 standards 1100 feet/335 m 75 ohm The frame structure complies with ITU-T G.704 standard.
Issue 02 (2006-11-01)
51
7 Technical Specifications
7.3.9 ADSL
Table 7-18 Technical specifications of the ADSL port Parameter Upstream Bandwidth Maximum transmission rate Downstream Bandwidth Maximum transmission rate Maximum transmission distance Line code Standard compliance Specification 26 kHz138 kHz 896 kbit/s 138 kHz1.104 MHz 8160 kbit/s 5 km DMT ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite) and ANSI T1.413
7.3.10 ADSL2+
Table 7-19 Technical specifications of the ADSL2+ port Parameter Upstream Bandwidth Maximum transmission rate Downstream Bandwidth Maximum transmission rate Maximum transmission distance Line code Standard compliance Specification 26 kHz138 kHz 1.2 Mbit/s 138 kHz2.208 MHz 24 Mbit/s 6 km DMT ITU-T G.992.5
52
Issue 02 (2006-11-01)
7 Technical Specifications
7.3.11 SHDSL
Table 7-20 Technical specifications of the SHDSL port Parameter Specification Over one twisted pair Transmission rate Rate adjustment step Transmission distance Line code Frame protocol Transmission mode Standard compliance 192 kbit/s2312kbit/s 64 kbit/s 36 km TC-PAM E1, PCM, ATM and ISDN G.991.2 Annex A and G.991.2 Annex B ITU-T G.991.2 Over two twisted pairs 384 kbit/s4608 kbit/s 128 kbit/s
7.3.12 VDSL
Table 7-21 Technical specifications of the VDSL port Parameter Upstream Bandwidth Maximum transmission rate Downstream Bandwidth Maximum transmission rate Maximum transmission distance Line code At 0.5 mm wire At 0.4 mm wire Specification 4.5 MHz7.9 MHz 12.5 Mbit/s 0.9 MHz3.3 MHz 12.5 Mbit/s 1.5 km 1.2 km QAM
Issue 02 (2006-11-01)
53
7 Technical Specifications
7.3.13 E1
Table 7-22 Technical specifications of the E1 port Parameter Transmission rate Bit rate tolerance Line code Standard impedance Transmission distance Nominal pulse width Port protection capability Standard compliance Specification 2048 kbit/s 50 ppm HDB3 75 ohm (coaxial) 1000 m 244 ns Comply with ITU-T K.20 Physical layer complies with ITU-T G.703, and frame structure complies with ITU-T G.704. 120 ohm (STP) 3000 m
7.3.14 V.35
Table 7-23 Technical specifications of the V.35 port Parameter Mechanical characteristic Electric characteristic Clock and data signals Control signal Interface function Maximum data transmission rate Transmission rate in practice Transmission distance Standard compliance Specification 34-pin connector Balanced interface circuit Unbalanced interface circuit Data, control, clock and earthing 10 Mbit/s N x 64 kbit/s (N = 132) 15 m ITU-T V.35, ITU-T V.24 and ISO2593 (M34)
54
Issue 02 (2006-11-01)
7 Technical Specifications
IEEE standard for local and metropolitan area networks--Common specifications--Media access control (MAC) Bridges Traffic class expediting and dynamic multicast filtering IEEE standard for local and metropolitan area networks: Virtual Bridged Local Area Networks Local and metropolitan area networks---Common specifications Part 3: Media Access Control (MAC) Bridges---Amendment 2---Rapid Reconfiguration Port Based Network Access Control IEEE standard for local and metropolitan area networks Specific requirements Part 2: Logical Link Control Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Frame Extensions for Virtual Bridged Local Area Network (VLAN) Tagging on 802.3 Networks (Clause 43) Aggregation of Multiple Link Segments Definition of Fast Ethernet (100BTX, 100BT4, 100BFX) Definition of Full Duplex operation in a switched (LAN Flow control) Definition of Gigabit Ethernet (over Fibre) Digital network echo cancellers Digital hierarchy bit rates Physical / electrical characteristics of hierarchical digital interfaces
IEEE 802.1x IEEE 802.2 IEEE 802.3 IEEE 802.3ac IEEE 802.3ad IEEE 802.3u IEEE 802.3x IEEE 802.3z ITU-T G.168 ITU-T G.702 ITU-T G.703
Issue 02 (2006-11-01)
55
7 Technical Specifications
Standards ITU-T G.704 ITU-T G.706 ITU-T G.707 ITU-T G.711 ITU-T G.712 ITU-T G.723.1 ITU-T G.729 ITU-T G.781 ITU-T G.783 ITU-T G.785 ITU-T G.797 ITU-T G.803 ITU-T G.804 ITU-T G.811 ITU-T G.812 ITU-T G.813 ITU-T G.821
Description Synchronous frame structures used at primary and secondary hierarchical levels Frame alignment and cyclic redundancy check (CRC) Procedures relating to basic frame structures defined in recommendation G.704 G.707 Network Node Interface for the Synchronous Digital Hierarchy (SDH) Pulse code modulation (PCM) of voice frequencies Transmission performance characteristics of pulse code modulation channels Dual rate speech coder for multimedia communications transmitting at 5.3 and 6.3 kbit/s C source code and test vectors for implementation verification of the G.729 8 kbit/s CS-ACELP speech coder Synchronization layer functions Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks Characteristics of a flexible multiplexer in a synchronous digital hierarchy environment Characteristics of a flexible multiplexer in a plesiochronous digital hierarchy environment Architecture of transport networks based on the synchronous digital hierarchy (SDH) ATM cell mapping into plesiochronous digital hierarchy (PDH) Timing requirements at the outputs of primary reference clocks suitable for plesiochronous operation of international digital links Timing requirements of slave clocks suitable for use as node clocks in synchronization networks Timing characteristics of SDH equipment slave clocks (SEC) Error performance of an international digital connection operating at a bit rate below the primary rate and forming part of an integrated services digital network The control of jitter and wander within digital networks which are based on the 2048kbit/s hierarchy The control of jitter and wander within digital networks which are based on the 1544kbit/s hierarchy Error performance parameters and objectives for international constant bit rate digital paths at or above the primary rate
56
Issue 02 (2006-11-01)
7 Technical Specifications
Description Framework recommendation on functional access networks (AN): architecture and functions, access type, management and service node aspects Optical interfaces for equipments and systems relating to the synchronous digital hierarchy Digital line systems based on the synchronous digital hierarchy for use on optical fibre cables Access digital section for ISDN basic rate access Digital transmission system on metallic local lines for ISDN basic rate access Access digital section for ISDN primary rate at 2048kbit/s V-interfaces at the digital local exchange (LE) V5.1-interface (based on 2048kbit/s) for the support of access network (AN) V-interfaces at the digital local exchange (LE) V5.2-interface (based on 2048kbit/s) for the support of access network (AN) Optical access networks to support services up to the ISDN primary rate or equivalent bit rates Single-pair high-speed digital subscriber line (SHDSL) transceivers Asymmetric Digital Subscriber Line (ADSL) transceivers ITU standard for low-speed Asymmetrical Digital Subscriber Line without voice splitter Asymmetrical digital subscriber line (ADSL) transceivers 2 (ADSL2) Asymmetrical digital subscriber line (ADSL) transceivers extended bandwidth ADSL2 (ADSL2plus) Digital Subscriber Line (DSL) Transceiver Testing Procedure Physical layer management for Digital Subscriber Line (DSL) transceivers Gateway control protocol B-ISDN ATM layer specification B-ISDN ATM Adaptation Layer specification B-ISDN ATM Adaptation Layer Specification: Type 1 AAL B-ISDN ATM Adaptation Layer specification: Type 5 AAL Traffic control and congestion control in B-ISDN ISDN basic user-network interface layer 1 specification ISDN primary rate user-network interface layer 1 specification
ITU-T G.957 ITU-T G.958 ITU-T G.960 ITU-T G.961 ITU-T G.962 ITU-T G.964 ITU-T G.965 ITU-T G.982 ITU-T G.991.2 ITU-T G.992.1 ITU-T G.992.2 ITU-T G.992.3 ITU-T G.992.5 ITU-T G.996.1 ITU-T G.997.1 ITU-T H.248 ITU-T I.361 ITU-T I.363 ITU-T I.363.1 ITU-T I.363.5 ITU-T I.371 ITU-T I.430 ITU-T I.431
Issue 02 (2006-11-01)
57
7 Technical Specifications
Standards ITU-T I.432.2 ITU-T I.432.3 ITU-T I.610 ITU-T I.630 ITU-T M.3100 ITU-T Q.811 ITU-T Q.812 ITU-T Q.831 ITU-T Q.921 ITU-T Q.931 ITU-T T.30 ITU-T T.38 ITU-T V.24 ITU-T V.36 ITU-T V.90
Description B-ISDN user-network interface-Physical layer specification: 155,520kbit/s and 622,080kbit/s operation B-ISDN user-network interface - Physical layer specification: 1544 kbit/s and 2048 kbit/s operation B-ISDN operation and maintenance principles and functions ATM protection switching Generic network information model Lower layer protocol profiles for the Q3 and X interfaces Upper layer protocol profiles for the Q3 and X interfaces Fault and performance management of V5 interface environments and associated customer profiles ISDN user-network interface Data link layer specification ISDN user-network interface layer 3 specification for basic call control Procedures for document facsimile transmission in the general switched telephone network Procedures for real-time Group 3 facsimile communication over IP networks List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) Modem using the 60-108 kHz frequency band for synchronous data transmission A digital modem and analogue modem pair for use on the Public Switched Telephone Network (PSTN) at data signaling rates of up to 56 000 bit/s downstream and up to 33 600 bit/s upstream Transport of IP over ATM in public networks User Datagram protocol The TFTP Protocol (Revision 2) Internet protocol Internet Control Message Protocol Transmission Control Protocol An Ethernet Address Resolution Protocol (ARP) Telnet protocol A standard for the transmission of IP datagrams over Ethernet networks
ITU-T Y.1310 RFC 0768 RFC 0783 RFC 0791 RFC 0792 RFC 0793 RFC 0826 RFC 0854 RFC 0894
58
Issue 02 (2006-11-01)
7 Technical Specifications
Standards RFC 1112 RFC 1155 RFC 1157 RFC 1213 RFC 1483 RFC 1493 RFC 1542 RFC 1643 RFC 1661 RFC 1723 RFC 1757 RFC 1889 RFC 1890 RFC 1907 RFC 2198 RFC 2225 RFC 2236 RFC 2328 RFC 2364 RFC 2515 RFC 2516 RFC 2613 RFC 2652 RFC 2662 RFC 2784 RFC 2819 RFC 2833
Description Host extensions for IP multicasting Structure and Identification of Management Information for TCP/IP-based Internets, Network Working Group, May 1990 Simple Network Management Protocol (SNMP) Management Information Base for Network Management of TCP/IP-based internets: MIB-II 2.Draft Standards Multiprotocol Encapsulation over ATM Adaptation Layer 5 Bridge MIB Clarifications and Extensions for the Bootstrap Protocol (DHCP-Relay) Definitions of Managed Objects for the Ethernet-like Interface Types Point to Point Protocol (PPP) RIP Version 2 (RIP2) Remote Network Monitoring Management Information Base RTP: A Transport Protocol for Real-Time Applications RTP Profile for Audio and Video Conferences with Minimal Control Management Information Base for Version 2 of the Simple Network Management Protocol (SNMPv2) RTP Payload for Redundant Audio Data Classical IP and ARP Over ATM (IPoA) Internet Group Management Protocol Version 2 (IGMP V2) OSPF Version 2,Network Working Group, April 1998 PPP Over AAL5 (PPPoA) Definitions of Managed Objects for ATM Management A Method for Transmitting PPP Over Ethernet (PPPoE) Remote Network Monitoring MIB Extensions for Switched Networks Ethernet Interface MIB Definitions of Managed Objects for the ADSL Lines Generic Routing Encapsulation (GRE) Remote Network Monitoring RTP Payload for DTMF Digits, Telephony Tones and Telephony Signals
Issue 02 (2006-11-01)
59
7 Technical Specifications
Standards RFC 2960 RFC 3015 RFC 3057 RFC 3389 RFC 3440 RFC 3525 RFC 3550 RFC 3551 RFC 4040
Description Stream Control Transmission Protocol Megaco Protocol Version 1.0 ISDN Q.921-User Adaptation Layer (IUA) Real-time Transport Protocol (RTP) Payload for Comfort Noise (CN) Definitions of Extension Managed Objects for Asymmetric Digital Subscriber Lines Gateway Control Protocol Version 1 RTP: A Transport Protocol for Real-Time Applications RTP Profile for Audio and Video Conferences with Minimal Control RTP payload format for a 64 kbit/s transparent call.
60
Issue 02 (2006-11-01)
A
A AAL1 AAL5 ACL ADM ADSL AG AN APS ARP ASL ATM
ATM Adaptation Layer Type 1 ATM Adaptation Layer Type 5 Access Control List Add and Drop Multiplexer Asymmetric Digital Subscriber Line Access Gateway Access Network Automatic Protection Switching Address Resolution Protocol Analog Subscriber Line Asynchronous Transfer Mode
B BHCA BMS BRI BRAS Busy Hour Call Attempt Broadband integrated network Management System Basic Rate Interface Broadband Remote Access Server
C CAPEX CBR CENTREX Capital Expenditure Constant Bit Rate Central Exchange
Issue 02 (2006-11-01)
61
Circuit Emulation Service Challenge Handshake Authentication Protocol Caller Identification Display Command Line Interface Calling Line Identification Presentation Capability Maturity Model Comfort Noise Generation Customer Premises Equipment Cyclic Redundancy Check
D DCE DDI DDN DMT DSLAM DSP DTE DTMF Data Circuit-terminating Equipment Direct-Dialing-In Digital Data Network Discrete Multi-Tone Digital Subscriber Line Access Multiplexer Digital Signal Processing Data Terminal Equipment Dual Tone Multi-Frequency
F FE FoIP FTTB FTTC FXO Fast Ethernet Fax over IP Fiber To The Building Fiber To The Curb Foreign Exchange Office
G GE Gigabit Ethernet
62
Issue 02 (2006-11-01)
GUI
I IGMP IMA IP IPoA ISDN Internet Group Management Protocol Inverse Multiplexing for ATM Internet Protocol IP over ATM Integrated Services Digital Network
L LE M MAN MDF MGCP MIB MML MoIP MSN MSP MSTP MTA Metropolitan Area Network Main Distribution Frame Media Gateway Control Protocol Management Information Base Man Machine Language Modem over IP Multiple-Subscriber Number Multiplex Section Protection Multi-Service Transmission Platform Multifunctional Terminal Adapter Local Exchange
N NGN nrt-VBR Next Generation Network non-real time Variable Bit Rate
Issue 02 (2006-11-01)
63
Optical Network Unit Operative Expenditure Open Shortest Path First Operating Support System
P PCM PDH POTS PPP PPPoE PRI PSTN PVC Pulse-Code Modulation Plesiochronous Digital Hierarchy Plain Old Telephone Service Point-to-Point Protocol PPP over Ethernet Primary Rate Interface Public Switched Telephone Network Permanent Virtual Connection
R RADIUS RIP RSTP RTCP RTP rt-VBR Remote Authentication Dial In User Service Routing Information Protocol Rapid Spanning Tree Protocol Real-time Transport Control Protocol Real-time Transport Protocol real time Variable Bit Rate
S SDH SEC SMS SNCP SNMP Synchronous Digital Hierarchy SDH Equipment Slave Clocks Service Management System Sub-network Connection Protection Simple Network Management Protocol
64
Issue 02 (2006-11-01)
Single-pair High-bit-rate Digital Subscriber Line Semi-permanent Connection Set Top Box Synchronous Transfer Mode
T TDM TL1 ToS Time Division Multiplexing Transaction Language 1 Type of Service
V VAD VBR VDN VDSL VF VLAN VoIP VP Voice Activity Detection Variable Bit Rate Video Distribution Network Very High Speed DSL Voice Frequency Virtual Local Area Network Voice over IP Virtual Path
Issue 02 (2006-11-01)
65
Index
Index
A
ADLB, 19 ADMB, 19 ADMC, 19 AIUB, 20 APMB, 17 APSB, 18 ASL, 18
F
frame dimension, 43 front-access frames HABD, 12 HABE, 13 HABF, 14 HABL, 15
B
broadband service layer 2 and layer 3 features, 23 port, 23 QoS features, 24 security, 23
I
IPMB, 17
M
MSTP networking single-level, 27 two-level, 27 multicast video service, 24
C
cabinet dimension, 43 CDI, 18 CLI, 37 CSLB, 19 CSMB, 19
N
network application triple play, 35 networking description MSTP, 26 SDH+FE/GE, 28 SDH+STM-1 ATM, 31 networking features MSTP, 28 SDH+FE/GE, 30 SDH+STM-1 ATM, 33 NGN, 1 NGN voice service, 22
D
DEHA, 20 DSL, 18
E
EAUA, 19 EMS hardware configuration, 37 inband networking, 41 management function, 38 outband networking, 42 software configuration, 38 ESC, 20
O
ONU-F01D1000, 9 ONU-F01D200, 9 ONU-F01D500, 9 ONU-F02A, 9 ONU-F02AF, 10
Issue 02 (2006-11-01)
i-1
Index
P
power supply, 44 private circuit service, 24 PSTN voice service, 21 PVM, 17 PVU8/PVU4, 17 PWX, 20
two-level, 30 SDH+STM-1 ATM networking single-level, 32 two-level, 32 SDL, 18 SDLB, 18, 19 system performance specifications, 45
R
rear-access frames HABC, 11 RSU8/RSU4, 18 running environment, 44
T
TSSB, 20
U
UA5000 features, 3
S
scenarios NGN consolidation, 33 private circuit service, 34 SDH+FE/GE networking single-level, 29
V
VFB, 18
W
weight, 44
i.
i-2
Issue 02(2006-11-01)