Professional Documents
Culture Documents
Allegro OrCAD PCB Editor - Gerber-Drill Output PDF
Allegro OrCAD PCB Editor - Gerber-Drill Output PDF
When the Artwork Control Form opens, click on the General Parameters tab and confirm the following settings:
Click on the Film Control tab to make active. Choose Select all at the bottom of the Available films section and then choose Create
Artwork. Choose OK to close window.
To generate the NC Drill file, go back to Manufacture > NC > NC Drill.
The NC Drill dialog box will open. Confirm that Root file name is present (board name.drl) and select Auto Tool Select. Click on the
Drill button to generate the NC Drill file.