Professional Documents
Culture Documents
Week 2 Quiz
Week 2 Quiz
Help
Warning: The hard deadline has passed. You can attempt it, but you will not get credit for it.
You are welcome to try it as a learning exercise.
In accordance with the Coursera Honor Code, I (Juan Carlos Vega Oliver) certify that
the answers here are my own work.
Question 1
What is the Reynolds number in a 50 cm diameter pipe passing water ( = 1 cP and
3
= 1,000 kg/ m
Question 2
Which of the following fittings creates the smallest pressure drop?
rounded exit
tee fitting
90 elbow
45 elbow
Question 3
Which of the following produces the greatest pressure drop when passing the same volumetric flow
rate, Q?
A large diameter, short pipe
A large diameter, long pipe
A small diameter, short pipe
A small diameter, long pipe
Question 4
A fluid with = 5 x 106 m2 /s flows through a 5 cm diameter pipe with 0.1 mm roughness at an
average velocity of 10 m/s. What is the friction factor for this flow?
0.025
0.020
0.039
0.033
Question 5
A 2 cm diameter pipe with 0.5 mm roughness passes water at 0.005 m3 /s. For this question, assume
= 1,000 kg/m3 . What is the expected pressure drop per meter of pipe?
336 kPa/m
192 kPa/m
114 kPa/m
442 kPa/m
Question 6
A schematic for a hydraulic circuit appears below. The two cylinders are ideal and have identical
geometry. Which of the following statements about the circuit is untrue?
In accordance with the Coursera Honor Code, I (Juan Carlos Vega Oliver) certify that
the answers here are my own work.
Submit Answers
Save Answers
You cannot submit your work until you agree to the Honor Code. Thanks!