Professional Documents
Culture Documents
NSCP 2010 PDF
NSCP 2010 PDF
Plulippines
ilippines
nes
es
, .,. 511
CHAPTER ~ - Co ncre te
4 ~ 3
U = 1.4(D + F)
(40 9- 1)
(409-2)
(409-3)
(409-4)
u=
(409 -5)
(409 -6)
(409-7)
except as follow s:
I.
2.
3.
4.
I.
2.
0.75
0.65
For sect ions in which the net tensile strength, Cr. is between
the limits for co mpress ion-cont rol led an d tensio n-controlled
sectio ns, shall be permi tted 10 be linearly increased from
that for compression-con trolled sectio ns to 0 .90 as f.,
incre ases from the co mpression-controlled strain lim it 10
0.005.
Altern atively , when Sectio n 425 is used, for membe rs in
which [I' does not exceed 415 MPa, with s ymmetric
reinforcement, and with (11 cl')/I! not less than 0.70. shall
be permitted to be increased linearly to 0.90 as P,
decreases from 0.10 Fe A,( to zero. For o ther reinforced
memb ers. sha ll be permitted to be increased linearly to
0.90 as P" decreas es from 0.10 F, A ~ or Ph. whic hever is
smaller. to zero.
409.4.2.3 Shear an d torsion (Sec also Sect ion 409.4.4 (or
shear walls and frames in Se ismic Zo ne 4)
0.75
409.4 .2.4 Bearing on co ncrete (except for posttensioning anchorage zones )
0.65
085
th
me 1
ilippines
ume 1
s of tile Philippines