Professional Documents
Culture Documents
Hairdryer Styling Exercise
Hairdryer Styling Exercise
In this exercise you will explore the power of the Lofted Boss/Base command further to make the outer geometry
similar to the hairdryer show below.
Step 1:
Create geometry for the main body as shown. You will require three sketches in total. Please note all sizes can be
approximate, and feel free to exercise your creative flair!
Model Origin
Step 2:
Create a lofted Boss/Base
Step 3:
Create geometry for the handle as shown. You will need to create a sketch for the centre curve, then a plane and
sketch on each end.
Ellipse
Circle
Step 4:
Create a lofted Boss/Base, use the centre curve to control the form:
Step 5:
Add fillets as shown to the positions below.
Fillets