Cut off, Active and saturation regions of a transistor:
Transistor Biasing:The application of suitable dc voltages across the transistor terminals is
called biasing. Each junction of a transistor may be forward biased or reverse biased independently.These are following three different ways of biasing a transistor ,which is also known as modes of transistor operation.
Forward active:Emitter-Base junction is forward biased
Collector- base junction is reverse biased. Emitter-Base persimpangan adalah bias maju Kolektor-basis junction yang terbalik bias.
Saturation Region:Emitter-Base junction is forward biased
Collector- base junction is forward biased In this mode transistor has a very large value of current. The transistor is operated in this mode, when it is used as a closed switch. Emitter-Base persimpangan adalah bias maju Kolektor-basis persimpangan yang bias maju Dalam mode ini transistor memiliki nilai yang sangat besar saat ini. Transistor dioperasikan dalam mode ini, bila digunakan sebagai saklar tertutup
Cut- off Region:Emitter-Base junction is reverse biased
Collector- base junction is reverse biased In this region both the junctions are Reverse Biased. In this mode transistor has zero current. The transistor is operated in this mode, when it is used as an open switch.
Emitter-Base persimpangan adalah reverse bias
Kolektor-basis junction yang terbalik bias Di wilayah ini baik persimpangan adalah reverse bias. Dalam mode ini transistor memiliki arus nol. Transistor dioperasikan dalam mode ini, bila digunakan sebagai saklar terbuka
Output characteristics of Common Emitter Transistor