This standard operating procedure outlines how to change the oil in a motorcycle. It is intended for motorcycle owners and describes removing the old oil, cleaning the oil tank, adding new oil, and starting the motorcycle to circulate the new oil. The procedure has 9 steps, including positioning the motorcycle, opening the oil tank, cleaning it, adding new oil, closing the tank, and starting the motorcycle to complete the oil change process.
This standard operating procedure outlines how to change the oil in a motorcycle. It is intended for motorcycle owners and describes removing the old oil, cleaning the oil tank, adding new oil, and starting the motorcycle to circulate the new oil. The procedure has 9 steps, including positioning the motorcycle, opening the oil tank, cleaning it, adding new oil, closing the tank, and starting the motorcycle to complete the oil change process.
This standard operating procedure outlines how to change the oil in a motorcycle. It is intended for motorcycle owners and describes removing the old oil, cleaning the oil tank, adding new oil, and starting the motorcycle to circulate the new oil. The procedure has 9 steps, including positioning the motorcycle, opening the oil tank, cleaning it, adding new oil, closing the tank, and starting the motorcycle to complete the oil change process.
(Sample SOP) PURPOSE This procedure explains how to replace the motorcycle oil is good and right Scope This procedure is used for people who have a motorcycle Responsibility All those who have a need to maintain and take care of the motorcycle. one is to replace with new oil, so that the engine is well maintained. Procedure 1. Put the motorcycle in a standard position 2 or 1 and make sure the motor is of 2. Open the oil tank using pliers, and open the top cover and the bottom part of the oil tank 3. After that clean the oil tank with a compressor to clean and make sure there are no used oil inside the oil tank 4. Then close the bottom cover oil tank 5. The next is to open new oil using a screwdriver 6. Then pour the oil into the oil tank with caution 7. The next stage of the lid back part of the top cover oil tank 8. After that turn on and heat the motorcycle 9. Finish.