Professional Documents
Culture Documents
MIN elastomeric bearings designed, manufactured and tested in accordance with BS 5400 Section 9. These bearings are marketed under the product codes. HS Elastomeric Bearing Strip.
This catalogue presents our range of HS bearings with their performance characteristics. They cover a wide range of loads and movements. If these bearings do not meet your specific requirements, we will be pleased to study your inquiries and recommend alternative bearings of suitable dimensional construction.
DESIGN CONSIDERATION
MIN Elastomeric Bearings are calculated using the following properties :Shear Modulus, G = 0.9 N/mm2 Bulk Modulus, E = 2000 N/mm2 Hardness, IRHD = 60 Material = Natural Rubber The loadings are based on Serviceability Limit State as stipulated in BS 5400 Section 9.1 Clause 10.1.4 with the assumption of the Dead Load Effect being numerically equal to Live Load Effect.
The Part Number of each bearing in this catalogue identifies the construction as shown in the example below :-