Professional Documents
Culture Documents
limited
Preface
This study report examines the fire load of the factory of M/s colour Flex
limited. Three basic methods are used to estimate the combustible energy
content of a particular area. These are
direct measurement of mass, with conversion based on the net heat of
combustion;
direct measurement of volume (with conversion based on a combination
of density and net heat of combustion); and
energy release measurement by calorimetry of an item sufficiently similar
to the fuel package.
The NFPA Standard 557 proposed fire load survey inventory method was
used for determination of fire load in this study report.
The Management of M/s colour flex fully cooperated during the survey for fire
load determination and provided all the detailed documents and factory visit of
each and every corner.
M/s Jogal safety Tech. Private Limited, sincerely thanks the site management
for enthusiastic cooperation extended.
Contents
Sr. Number
1
2
3
Element
Fire load density calculation
fire load calculation
Annexure
1- List of combustibles/ flammables
2-Distribution of Flammables/ Combustible in
M/s Colour Flex
3-Density of different materials
4-Calorific value of different plastics
5Area wise total heat of combustion
calculation of material of M/s Colour Flex
Fire Load density of M/s Colour flex has been calculated by the
NFPA 557 formula as given below:
9019.5 SqM
Area wise total heat of combustion calculation of material of M/s Colour Flex