0% found this document useful (0 votes)
110 views1 page

DDT Engine Test Manual: Shut Off Procedure

This document provides instructions for performing a shut off test on individual cylinders of an engine to determine performance capability. The test involves shutting off the injector for one cylinder, increasing injection for the remaining cylinders, then restoring normal injection after turning the injector back on. The user selects the cylinder, the corresponding injector is shut off with injection increased for other cylinders, then the injector is turned back on and injection returns to normal.

Uploaded by

Thuy Anh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
110 views1 page

DDT Engine Test Manual: Shut Off Procedure

This document provides instructions for performing a shut off test on individual cylinders of an engine to determine performance capability. The test involves shutting off the injector for one cylinder, increasing injection for the remaining cylinders, then restoring normal injection after turning the injector back on. The user selects the cylinder, the corresponding injector is shut off with injection increased for other cylinders, then the injector is turned back on and injection returns to normal.

Uploaded by

Thuy Anh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

DDT Manual Engine Test

Engine Test Shut Off Test

Purpose : to determine the performance capability of an individual cylinder


Test Logic :

The user chooses one cylinder to shut off.


S1 : Corresponding injector is shut off.
- Injection quantity is increased.

S2 : Injector is turned back on


- Back to normal injection

How To
1. Click Graph
2. Click None
3. Shut off the each individual injector by button
- increasing current injection quantity graph
4. Click Stop
- Shut off the other injector by button

You might also like