Professional Documents
Culture Documents
Manual Ram Connection PDF
Manual Ram Connection PDF
BY KITTIKUN PHONSUWAN
Joint
RAM CONNECTION Standalone offers different joint families,
each one of them is able to receive various types of connections.
In the next table, all family joints, available connections in the
program and the loads required to formulate all the design
checks are shown.
Detail Connection Type
LOAD SYMBOL FOR CONNECTION
Column loads:
V2: Shear force acting in the column minor axis. Used in: Shear connections.
Axial: Axial force acting on the column. Positives values for tension.
Used in: Moment connections and shear connections.
M33: Bending moment about the column major axis. Used in: Moment
connections.
M22: Bending moment about the column minor axis. Used in: Moment
connections.
EXAMPLE COLUMN-BRACES (CB)
Program Generate
Code
Program Combination
Design => Assign => Base Plate
Connection => Smart Gusset Base Plate
Template
Design => Critical Load Condition =>
Ratio 1
1 , D2 Load case
(D2 = DL+LL) Load Maximum
Edit ( )
Connection Pad !!!!
Geometry Ratio Connection
!!!!
Longitudinal & Transversal
**** General
Members :
>>> Transversal
**** Members
Base Plate :
Base Plate >>>>( Plate
, , ( ) )
Function>>>> Include Shear lug
N : Longitudinal Dimension
B : Transversal Dimension Base Plate
Base Plate
Base Plate
Support
Anchor
Anchor reinforcement
* Shear lug Geometry Shear lug ()
,, ,
Shear Lug
Support >>>> ,,
( fc )
Grouting ( ^^)
Anchor >>>> Geometry Bolt
Longitudinal Position
[Anchors Position ]
Transversal Position
Bolts
Customized
Design
Brace Connection
Gusset / Brace Connection
Stiffener
Bracing Member
General >>>> (
) General Geometry Connection
Claw angles >>>> Geometry Connection
( )
Connection
Connection Welded
Angles
Geometry Connection Angles
Save Connection
( ) Otimize ( Results ,Data
Out Put Result)
General
Joints list >>>> Geometry Joints Connection Joint 1 CB
Member Section Material Ratio Connection
( Connection 1 ) Connection
Joints list
Report
Export
word Excel
Load >>>> Load
Select Load Select All Design
Combination
OK Report
Load Select
Connection detail >>>> Report Geometry (Design Check )
Ratio "Interface between Gusset-Top right
brace Connection : Claw angle ,"Right Gusset Interface-base Plate Directly welded ,
" Upper left gusset interface-column Angles"
Base Plate Major Axis
Compression Anchors tension
Connection elements summary>>>> Elements Connection
Connection Elements
Sections L
Section T2L
Shells >>>> Plate
Bolts Material ,Length ,Qnty.
Anchors ^^
Welds
Connection Elements / Joint
Geometry Connection
^^
( General Results
Shear ,Moment Connection ,Gusset
,Shear and Moment Connection)