Professional Documents
Culture Documents
A Project report on
Pneumatic car
Under subject of
DESIGN ENGINEERING I
B. E. II, Semester III
(Mechanical Branch)
Submitted by Group:
Sr.no Name of student Enrollment no.
1 Puraswani Vishal A. 150603119012
2 Suthar Rushi S. 150603119017
3 Pathan Shahbazkhan S. 150603119010
4 Parmar Ranjitsinh M. 150603119005
Certificate
This is certify to Pathan Shahbazkhan S. having Enrollment no.
150603119010 student of B.E. Mechanical successfully submitted detail project
report of Pneumatic car during the academic year 2015-16.
This project work has been carried out by them in group (04 person) under
guidance of prof.D.K.Patel.
Date of Submission:
Content
SR.NO. TOPIC PAGE NO.
1. Title.01
2. Certificate........02
3. Table of content...03
4. List of images..04
5. Introduction05
6. Empathy mapping canvas...06
7. Ideation canvas10
8. Product development canvas...13
List of images:
SR.NO. IMAGE NAME PAGE NO.
1. Introduction
About our Group:
2. Empathy Mapping
Domain:
Our domain area is Automobiles. In todays world personal and public
transport is the most important thing. Rapid transport is essential with
environment friendly. But, the conventional vehicles which usage nowadays it
powered by petroleum fuels and exhaust smoke of this fuel is harmful to
environment.
The Purpose Of this project is to provide eco-friendly environment and good
health. To fulfill this purpose we have thought to invent the Pneumatic Car. In the
pneumatic Car, we think to use of compressed air to drive vehicle and elimination
of fuel.
The people who are involved in these activities can be civilians, travelers,
racers, researchers etc. the users are the owner of vehicle who can be student,
faculty, doctor, businessmen, domestic driver, employee, civilians, professional
racer etc.
Stakeholders are the environment saving NGOs, Researchers, Engineers
Automobile industries, pollution control organization etc.
Activity:
Image2.2 activities
Students going to School by cycling
Some people parking their cars
Passengers waiting for the bus
Traffic officer manage the traffic
Mechanic repair a car
Vehicles owners are in Queue on the patrol pump
Rickshaw drivers finding passengers
Taxi drop the passengers
People randomly walked on roads
Some people ride a bike
Ambulance going to the Hospital
We provided two sad and one happy emotional stories highlighting the
difficulties being faced.
Conclusion:
Automobiles are widely used in public and personal transportation also in
goods transportation. There are all type of people like students, teachers,
employee, domestic drivers, civilians, villagers, racer etc. Are relate to
automobiles .they are professionally or emotionally use vehicles. In conventional
vehicle there two main problem one is unavalibity of fuel in midways in highways,
rural areas and second is air pollution are caused by the vehicles.
3. Ideation canvas
Second task was to create THE IDEATION CANVAS. We described
activities of people and situation or location where they are facing problems. This
canvas is very helpful to reach near our goal. This canvas helped us to know what
the areas which need focus are.
People:
The people involved in activities are travelers, employees, students, drivers etc.
Image3.2 activities
Situation Location and contexts:
We attempted to identify different locations that are involved in performing the
above activities, situations that are applied to perform certain activities and context
The problems we find out after analysis of ideation canvas are mentioned below:
After the fuel is over car is not run
Unavailability of fuel in rural area, mid highways in short distance.
The smoke of car is caused air pollution
No other system in car to drive for some short distance without fuel
Car is very costly
Maintenance and refilling fuel is costly
Props/Possible solution:
The possible solution for the problem figured out are should be:
Use renewable fuel
Air powered car
Solar / electric powered vehicle
Patrolling on the highways
Paddle generator electric vehicle
Eco friendly vehicle
Use of public transport
Image4.1 people
Civilians
Travelers
Drivers
Racers etc.
Purpose
:
Image 4.2 purpose
To make a vehicle which may have:
Ecofriendly
Pollution less
Renewable energy source
Easy availability of working media
Product function:
The purpose of our project is to design a product that should be used for
personal or public transportation, domestic driving and Material handling in the
industry etc.
.
Image 4.3 Product function
Product features:
Our designed product may have the following features
Components: