Professional Documents
Culture Documents
Force
1
MAP 2412: Physics Chapter 5: Moment of a
Force
(b) If the point of application of the 5 N force is moved to point P, distance 200 mm from
the support, find the new value of F to replace the 5 N force for the system to be in
equilibrium.
9. A beam is supported at its centre on a fulcrum and forces act as shown in the figure
below. Calculate
10. For the centrally supported uniform beam shown in the figure below, determine the
values of forces F1 and F2 when the beam is in equilibrium.
1
MAP 2412: Physics Chapter 5: Moment of a
Force
Determine
(b) The force acting on the beam support at A, neglecting the mass of the beam.
12. For the beam shown in the figure below, calculate (a) the force acting on support A (b)
distance d, neglecting any forces arising from the mass of the beam.
13. A metal bar AB is 4.0 m long and is supported at each end in a horizontal position. It
carries loads of 2.5 kN and 5.5 kN at distances of 2.0 m and 3.0 m, respectively, from A.
Neglecting the mass of the beam, determine the reactions of the supports when the
beam is in equilibrium.
1
MAP 2412: Physics Chapter 5: Moment of a
Force