Professional Documents
Culture Documents
1. INPUT DATA
The weight of equipment……………………………………………. 1600 kg
The width of the equipment leg ……..…………………………….. 1 m
The length of the equipment leg ……..…………………………….. 1 m
The dimension of a bearing plate:
the width………………………… 1.1
the length………………………… 1.1
the thicknes……………………… 4 mm
The dimesnion of the barrel (cylinder):
the dimeter……………………… 1.2 m
The height………………………. 3.1 m
The density of the fluid……………………………………………….. 1000 kg/m3
The weight of the fluid……………………………………………….. 2803.392 kg
The weight of the bearing plate...…………………………………… 38.0424 kg
31.44 kg/m2
The weight of equipment (as per area of bearing plate)…………. 1322.314 kg/m2
The eqipment level (distance from the base)………………….….. 2.481 m
The weight of valve…………………………………………………… 520 kg
The weight of pipes:
170 kg, pipe 600 mm with the length of 2.3 m= 391 kg
131 kg, pipe 500 mm with the length of 1.2 m= 157.2 kg
2. THE CONCEPT
The concept is based on the easier process of instalation and maintenace as well.
4. THE CHECK OF BEARING PLATE AND THE CHECK OF THE STEEL STRUCTURE
Are calculated in softwear STAAD PRO using AISC ASD design criteria and the input as
well output files are shown on following pages
Building / area: Chiller building rev: CHILLER BLDG Sheet:
issued for: APPROVAL 0 Support for the air separators 0 0 3