This document outlines safety precautions for hot work at heights using mobile elevating work platforms (MEWPs). It identifies potential hazards such as falls, fires and explosions, defective tools, burns, and electric shock. Recommended controls include barricading work areas, using personal protective equipment (PPE) like full body harnesses, inspecting equipment for defects, having fire extinguishers available, checking electrical safety, removing combustibles from the work area, and using protective clothing.
This document outlines safety precautions for hot work at heights using mobile elevating work platforms (MEWPs). It identifies potential hazards such as falls, fires and explosions, defective tools, burns, and electric shock. Recommended controls include barricading work areas, using personal protective equipment (PPE) like full body harnesses, inspecting equipment for defects, having fire extinguishers available, checking electrical safety, removing combustibles from the work area, and using protective clothing.
This document outlines safety precautions for hot work at heights using mobile elevating work platforms (MEWPs). It identifies potential hazards such as falls, fires and explosions, defective tools, burns, and electric shock. Recommended controls include barricading work areas, using personal protective equipment (PPE) like full body harnesses, inspecting equipment for defects, having fire extinguishers available, checking electrical safety, removing combustibles from the work area, and using protective clothing.
Fall of person Area should be barricade and restrict manual movement.
Use job specific PPEs while hot work at height.
Fire and explosion Use Full body harness with double lanyard (Use shock absorber if required). Anchoring point must be available in cherry picker Defective Tools Before starting the work check welding,cutting machines , Hot Work at height using MEWP Electrical cables without joints and other equipments are in good working condition. Burns Fire Extinguisher Shall must be available on work place.
Check welding Machine condition and ensure it
Electric Shock RCCB/ELCB good working condition with 30 mA .
All power tools and equipments shall must be inspected
and tested.
Remove all the combustible/inflammable material from
working area.
Make sure cutting set regulators is in good working
condition and flash back arrester both side tight by clamp.
Use full leather sleeves and apron.
CAPITAL CONSTRUCTION PVT. LTD. JOB SAFETY ANALYSIS