Professional Documents
Culture Documents
J-Tech™ Engine Brake Slave Lash Adjustment Change
J-Tech™ Engine Brake Slave Lash Adjustment Change
GROUP: 200
NUMBER: SB-266-014
DATE: 1/16/01
MODEL: J-Tech™
This new 0.017″ (0.432 mm) slave lash setting must be used whenever a valve adjustment/
engine brake lash adjustment is performed. At that same time, any engine information plate
that is still stamped with the 0.015″ specification should be re-stamped with the new 0.017″
setting. This 0.002″ increase in engine brake slave lash has no adverse effect on J-Tech™
operation or performance.
1
SB-266-014 — Page 1 of 1
SERVICE PUBLICATIONS, ALLENTOWN, PA 18105 ©MACK TRUCKS, INC. 2001