Professional Documents
Culture Documents
Title: Heat and Bend Glass Tubes
Title: Heat and Bend Glass Tubes
Problem Description
Heated glass tubes are passing in a process line having a particular length which
are to be bent. To manufacture fluorescent bulbs, these tubes are to be bent in U-
Shape. Automate this process in PLC using Ladder Diagram programming language.
Problem Diagram
Title: Control Level of a Single Tank
Problem Description
One open tank is installed in the plant of which liquid level is to be controlled.
When level reaches the Level Low, Outlet flow is blocked and inlet flow is allowed until
high level is achieved. And when Level High is detected, outlet flow is allowed and inlet
flow is blocked.
Problem Diagram
Title: Control Mixing in a Tank
Problem Description
Material A and Material B are collected in a tank. These materials are mixed for a while.
Mixed product is then drained out through Outlet valve.
Problem Diagram
Republic of the Philippines
University of Rizal system
Morong, Rizal
College of Engineering
Submitted by:
GROUP 10
Eric Justin Carreon
Jonie Balagoza Jr.
Ma. Theresa E. Segovia
5ECE
Submitted to: