This document contains test results for a 3-1/2 inch tool with serial number COD from July 3, 2017. The tool was tested over 5 runs where it was jarred with increasing pounds of force for 19 seconds, then delayed for 19 seconds before being jarred with decreasing pounds of force for 30,000 total pounds of force. The tool performed within expected parameters over the 5 test runs.
This document contains test results for a 3-1/2 inch tool with serial number COD from July 3, 2017. The tool was tested over 5 runs where it was jarred with increasing pounds of force for 19 seconds, then delayed for 19 seconds before being jarred with decreasing pounds of force for 30,000 total pounds of force. The tool performed within expected parameters over the 5 test runs.
This document contains test results for a 3-1/2 inch tool with serial number COD from July 3, 2017. The tool was tested over 5 runs where it was jarred with increasing pounds of force for 19 seconds, then delayed for 19 seconds before being jarred with decreasing pounds of force for 30,000 total pounds of force. The tool performed within expected parameters over the 5 test runs.