Professional Documents
Culture Documents
DSE91xx DSE92xx Data Sheet (USA)
DSE91xx DSE92xx Data Sheet (USA)
DSEPower
ELECTRO-MAGNETIC COMPATIBILITY
VIBRATION
BS EN 60068-2-6
The 2 Amp, 3 Amp and 5 Amp The chargers will continue to Ten sweeps in each of three
Battery Chargers have been operate during cranking and major axes
5 Hz to 8 Hz @ +/-7.5 mm,
designed to be permanently running. All chargers can accept 8 Hz to 500 Hz @ 2 gn
connected to a battery, keeping it multiple AC voltage connections.
charged to maximum capacity. HUMIDITY
BS EN 60068-2-30
The DSE battery chargers are Db Damp Heat Cyclic 20/55 oC
The chargers can be either expertly designed using high-grade @ 95% RH 48 Hours
mounted via DIN rail or to the components and capacitors BS EN 60068-2-78
Cab Damp Heat Static 40 oC
chassis, using the fixing holes that allowing the units to function more @ 93% RH 48 Hours
are built into the case. The chargers efficiently, providing a longer and
SHOCK
stylish design includes an LED more reliable life-span than other BS EN 60068-2-27
indicator on the front that shows chargers in their class. Their in- Three shocks in each of three major axes
when the charger is in a normal or built robustness makes them ideal 15 gn in 11 mS
overload condition. for the rigours of a wide variety of
markets including heavy and light
industrial environments.
1ph
N
DSE9000
7
OTHER
1 1
ISSUE 5
®
DSEPower
AC SUPPLY
FEATURES DC OUTPUT
DSE9130 OUTPUT
5 A DC 12 V DC at 13.7 V DC
DSE9150 OUTPUT
3 A DC 12 V DC at 13.7 V DC
DSE9155 OUTPUT
2 A DC 30 V DC at 34.3 V DC
DSE9255 OUTPUT
5 A DC 24 V DC at 27.4 V DV
EFFICIENCY
>80%
REGULATION
LINE
<0.001% Vo
LOAD
1% Vo
PROTECTIONS
Short Circuit
Over Voltage
Over Current
Reverse Polarity
DSE9130 - 5 A 12 V
DSE9155 - 2 A 30 V DIMENSIONS
DSE9255 - 5 A 24 V DSE9150 DIMENSIONS
108 mm x 101 mm x 49 mm
4.2” x 4” x 1.9”
WEIGHT
ADVANCED FEATURES KEY BENEFITS 0.16 kg
Multi-Stage Charging Boost Mode • Suitable for a wide range of
battery types DSE9130, DSE9155 & DSE9255
• Constant current- maximum • Boosts and equalises cell DIMENSIONS
current available during charge charge improving battery • No moving parts for longer 136 mm x 140 mm x 63 mm
recovery phase performance and life battery charger life 5.4” x 5.5” x 2.5”
• Constant voltage • Simple boost connection using • Switched mode design
WEIGHT
• Chargers automatically return to on-board terminals • Charge fail output 0.5 kg
float mode when charging is • Minimum 80% efficiency
Power Save Mode
-30 °C to +55 °C
throughout full operating range OPERATING TEMPERATURE RANGE
complete
-22 °F to +122 °F
• Once the battery is fully
Low Output Ripple charged the chargers switch to Paralleling Feature
• Makes the chargers ideal for all Eco-Power to save energy • Multiple modules can be linked STORAGE TEMPERATURE RANGE
together to provide larger current
-40 °F to +185 °F
battery types -40 oC to +85 oC
RELATED MATERIALS
TITLE PART NO’S
DSE9000 Series Installation Instructions 053-049
DSE9000 Series Operator Manual 057-085
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-059/10/10 (7)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457