Professional Documents
Culture Documents
DSEPower
ELECTRO-MAGNETIC COMPATIBILITY
DUAL OUTPUT INTELLIGENT BATTERY CHARGER BS EN 61000-6-2
24V 15A & 12V 10A EMC Generic Immunity Standard for the
Industrial Environment
BS EN 61000-6-3
EMC Generic Emission Residential
Requirements
BS EN 61000-6-4
EMC Generic Emission Standard for the
Industrial Environment
HUMIDITY
The DSE9462 is programmed using BS EN 60068-2-30
the user-friendly DSE Configuration Db Damp Heat Cyclic 20/55 oC
Suite PC software via USB. at 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40 oC
The charger is mounted to the at 93% RH 48 Hours
chassis using the fixing holes that are
SHOCK
built into the case. The charger’s BS EN 60068-2-27
stylish design includes four coloured Three shocks in each of three major axes
LEDs to indicate charging status and 15 gn in 11 mS
fault conditions.
1ph
N
2 2
DSE9462
7
OTHER
PT1000 ONLY
2 2
ISSUE 1
®
DSEPower
DSE9462
SPECIFICATION
AC SUPPLY
VOLTAGE RANGE
DC OUTPUTS
CHANNEL 1
15 A DC at 24 V DC
CHANNEL 2
10 A DC at 12 V DC
REGULATION
LINE
<0.5% x Vo
LOAD
1% x Vo
TYPE
PT1000
PROTECTIONS
ADVANCED FEATURES • Output short circuit and polarity KEY BENEFITS Short Circuit
DC Under & Over Voltage
• Intelligent two, three and four stage inversion with auto recovery • Fully flexible to maximise the life of
DC Over Current
charging profiles • Automatic power de-rating at high the battery Reverse Polarity
• Remote voltage sensing to ambient temperatures. • Suitable for a wide range of Over Temperature
compensate for voltage drop • Optional battery temperature battery types (chemistries) AC Under & Over Voltage
-22 °F to +131 °F
output -30 oC to +70 oC
• Automatic or manual boost and improving battery performance and
storage charge functions to help life • Can be permenantly connected to
maintain battery condition Power Save Mode battery and AC supply. No need to STORAGE TEMPERATURE RANGE
-22 °F to +158 °F
disconnect through high load -30 oC to +70 oC
• Digital microprocessor technology • Once the battery is fully charged
the chargers switch to eco-power conditions.
• Low output ripple
• Comes supplied with an EU
• Four LEDs indication. to save energy
specified captive 2 m mains cable.
Communication
Full Protection • Can be integrated into external
• AC input under voltage systems through J1939 using
• AC input over voltage CANBUS
• Battery charger output over • Fully configurable via DSE
voltage Configuration Suite PC
• Battery charger output over Software
current
• Battery low voltage detection
RELATED MATERIALS
TITLE PART NO’S
DSE9400 Series Configuration Suite PC Software Manual 057-159
DSE Configuration Suite Installation & Operator Manual 057-151
DSE9462 Installation Instructions 053-189
DSE9462 Operator Manual 057-255
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-206/02/16(1)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457