Professional Documents
Culture Documents
DSEGenset
ELECTRO-MAGNETIC COMPATIBILITY
The DSE7110 is an Auto Start Both modules offer electronic OPERATING TEMPERATURE
Control Module and the DSE7120 (CAN) and non-electronic (magnetic BS EN 60068-2-1
Ab/Ae Cold Test -30 oC
is an Auto Mains (Utility) Failure pick-up/alternator sensing) engine BS EN 60068-2-2
Control Module suitable for a wide versions and offer an extensive Bb/Be Dry Heat +70 oC
variety of single, diesel or gas, gen- number of flexible inputs, outputs VIBRATION
set applications. and advanced engine protections BS EN 60068-2-6
so the system can be easily Ten sweeps in each of three
major axes
Monitoring speed, frequency, adapted to suit a wide range of 5 Hz to 8 Hz @ +/-7.5 mm,
voltage, current, oil pressure, application demands. 8 Hz to 500 Hz @ 2 gn
coolant temperature and fuel level, HUMIDITY
the modules will display warnings, Enhanced features include a 4-line BS EN 60068-2-30
shutdown and engine status icon display. Db Damp Heat Cyclic 20/55 oC
@ 95% RH 48 Hours
information on the back-lit LCD BS EN 60068-2-78
screen and illuminated LEDs. The modules can be easily Cab Damp Heat Static 40 oC
@ 93% RH 48 Hours
configured using the DSE
Configuration Suite PC software. SHOCK
Front panel editing is also available. BS EN 60068-2-27
Three shocks in each of three major axes
15 gn in 11 mS
DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
4 4 3
DEUTZ
DSE7110/20 ISUZU
PERKINS
CATERPILLAR
MTU
7 VOLVO
CUMMINS
OTHER SCANIA
MAINS (UTILITY) N/C VOLT FREE N/O VOLT FREE GENERATOR SENSING CHARGE FUEL & CRANK ELECTRONIC
SENSING OUTPUT OUTPUT ALTERNATOR OUTPUTS ENGINES OR
DSE7120 ONLY (Flexible with CAN) MAGNETIC PICK-UP
ISSUE 2
PENDING
®
DSEGenset
DSE7110/20 SPECIFICATION
DC SUPPLY
FREQUENCY RANGE
3.5 Hz to 75 Hz
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt free)
GENERATOR
VOLTAGE RANGE
15 V to 333 V AC (L-N)
FREQUENCY RANGE
KEY FEATURES • Test button (DSE7120 only) information for monitoring and 3.5 Hz to 75 Hz
• Back-lit icon LCD display • Automatic load transfer maintenance periods
MAGNETIC PICK UP
• Five key menu navigation (DSE7120 only) • User-friendly set-up and button VOLTAGE RANGE
• Front panel editing • Battery voltage monitoring layout +/- 0.5 V to 70 V
• LED and LCD alarm indication • Engine pre-heat • Multiple engine parameters are
FREQUENCY RANGE
• Power Save mode • Hours counter monitored simultaneously 10,000 Hz (max)
• 4 Digital inputs • Comprehensive shutdown or • Module can be configured to
• 3 Analogue inputs (2 fixed, 1 warning on fault condition suit individual applications DIMENSIONS
OVERALL
flexible) • Fully configurable via DSE • Compatible with a wide range 240 mm x 181 mm x 42 mm
• 6 configurable outputs Configuration Suite PC software of CAN engines 9.4” x 7.1” x 1.6”
• Configurable timers and alarms • USB connectivity • Uses DSE Configuration Suite
PANEL CUT-OUT
• Alternative configuration • Remote SCADA monitoring via PC software for simplified 220 mm x 160 mm
• Event Log (5) DSE Configuration Suite PC configuration 8.7” x 6.3”
• CAN and Magnetic Pick up / software • IP65 rating (with supplied
MAXIMUM PANEL THICKNESS
Alt. sensing gasket) offers increased 8 mm
• 3 Phase generator monitoring KEY BENEFITS resistance to water ingress 0.3”
• Current monitoring and • Automatically transfers between • Licence-free software
STORAGE TEMPERATURE RANGE
protection mains (utility) and generator -40 oC to +85 oC
• 3 Phase Mains (Utility) power (DSE7120 only)
monitoring (DSE7120 only) • Hours counter provides accurate OPERATING TEMPERATURE RANGE
-30°C TO +70°C
RELATED MATERIALS
TITLE PART NO’S
DSE7110 Installation Instructions 053-080
DSE7120 Installation Instructions 053-081
DSE7100 Operator Manual 057-113
DSE7100 Configuration Suite PC Manual 057-117
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-081/10/11 (4)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457