Professional Documents
Culture Documents
DSEGenset
TEMPERATURE
BS EN 60068
Ab/Ae Cold Test -30oC
The DSE8610 is an easy to use The event log will record 250 events KEY LOAD SHARE FEATURES: BS EN 60068-2-2
multi-generator loadshare system, to facilitate easy maintenance. An • Peak lopping Bb/Be Dry Heat +70oC
designed to synchronise up to 32 extensive number of fixed and • Sequential set start VIBRATION
generators including electronic and flexible monitoring, metering and • Manual voltage/frequency BS EN 60068-2-6
non-electronic engines. protection features are included adjustment Ten sweeps in each of three major axes
5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
as well as comprehensive • R.O.C.O.F. and vector shift
The DSE8610 monitors the communication and system • Generator load demand HUMIDITY
generator and indicates operational expansion options. • Automatic hours run balancing BS EN 60068-2-30
Db Damp Heat Cyclic 20/55oC @ 95% RH
status and fault conditions, • Mains (Utility) de-coupling 48 Hours
automatically starting or stopping Using the DSE PC Configuration • Mains (Utility) de-coupling BS EN 60068-2-78
the engine on load demand or fault Suite Software allows easy test mode Cab Damp Heat Static 40oC @ 93% RH
48 Hours
condition. alteration of the operational • Dead bus sensing
sequences, timers and alarms. With • Bus failure detection SHOCK
System alarms are annunciated on all communication ports capable of • Direct governor and AVR control BS EN 60068-2-27
Three shocks in each of three major axes
the LCD screen (multiple language being active at the same time, the • Volts and frequency matching 15gn in 11mS
options available), illuminated LED DSE8610 is ideal for a wide variety • kW and kV Ar load sharing
DEGREES OF PROTECTION
and audible sounder. of demanding load share PROVIDED BY ENCLOSURES
applications. BS EN 60529
IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
DSENET ®
RS232 AND USB USB CONFIGURABLE DC OUTPUTS ANALOGUE EMERGENCY DC POWER
EXPANSION RS485 PORT HOST INPUTS SENDERS STOP SUPPLY 8-35V
ETHERNET +
DEUTZ
DSE8610 MSC
ISUZU
PERKINS
CATERPILLAR
MTU
7 8610 8610 8660 VOLVO
OTHER
CUMMINS
SCANIA
BUS VOLT FREE GENERATOR SENSING FUEL & CRANK CHARGE ELECTRONIC MAGNETIC
SENSING OUTPUTS OUTPUTS ALTERNATOR ENGINES PICK-UP
FLEXIBLE WITH CAN
CURRENT VOLTS D+
+ W/L
ISSUE 2
®
DSEGenset
DSE8610 SPECIFICATION
DC SUPPLY
AUTO START LOAD SHARE MODULE CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
FEATURES without the need for internal batteries
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (CRANK)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt free)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK-UP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-083/10/10 (2)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457