Professional Documents
Culture Documents
MY PROFILE Solution Report For Electrical Circuits Part 1
Represent w hole test solution w ith correct and incorrect answ ers.
REPORTS
View Your Test Analysis
BUY PACKAGE
NEWS
Q. No Question Status
Ask an Expert
Q.1 Consider the below figure
The value of the voltage ‘V ’ such that 100 C charge is injected to the 50 V source
in 1 minute is
a. 0 V
b. –36.7 V
c. –70.36 V
d. 100 V
Not Attem pt Correct Ans. b
FAQ? Have any doubt? Solution
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1432&t=a&testType=2 1/7
1/12/2017 MADE EASY ONLINE TEST SERIES
a. 2 V
b. 4 V
c. 6 V
d. 12 V
a. 4 V
b. 10 V
c. 7.5 V
d. 15 V
Not Attem pt Correct Ans. c
FAQ? Have any doubt? Solution
Q.4 Consider the circuit shown below
V R = 20 V when R = 10 Ω
and V R = 30 V when R = 20 Ω
If the value of R = 80 Ω, then the value of V R is
a. 50 V
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1432&t=a&testType=2 2/7
1/12/2017 MADE EASY ONLINE TEST SERIES
b. 48 V
c. 88 V
d. 125 V
Q.5 For a given circuit a voltage of 200 V is applied to a tapped resistor of 500 Ω. The
value of resistance between the two points connected to a circuit for which
current is 0.1 A at 25 V is _____ Ω.
Q.6 In the given circuit, three bulbs are connected to a 9 V battery.
The equivalent resistance of the circuit is __________ Ω.
Q.7 Consider the circuit shown below
The maximum power delivered to Rout is ________ mW.
Q.8 For the circuit shown below
The value of ZL for maximum power transfer to ZL is
a.
b.
c.
d.
Not Attem pt Correct Ans. c
FAQ? Have any doubt? Solution
and N2 are equivalent
a. Vs = 80 V, Rs = 200 Ω
b. Vs = 80 V, Rs = 800 Ω
c. Vs = 60 V, Rs = 150 Ω
d. Vs = 60 V, Rs = 200 Ω
Q.10 Two bulbs of 100 W, 220 V are required to be connected across a 400 V supply in
parallel. The value of resistance to be inserted in the line so that the voltage
across the bulbs does not exceed 220 V will be
a. 55.7 Ω
b. 180 Ω
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1432&t=a&testType=2 4/7
1/12/2017 MADE EASY ONLINE TEST SERIES
c. 197.8 Ω
d. 220 Ω
Not Attem pt Correct Ans. c
FAQ? Have any doubt? Solution
Q.11 For the circuit given below
We are interested in replacing branch xy by a voltage generator with a series
impedance of j2Ω as shown in figure (b), without altering the circuit response.
The voltage of the generator E is
a. 8∠45° V
b.
c.
d. 8∠+63.43° V
Not Attem pt Correct Ans. b
FAQ? Have any doubt? Solution
Q.12 For the network shown in the below figure the potential difference between node
X and the earth is
a. 30 V
b. 18 V
c. 70 V
d. 225 V
Q.13 In the circuit given below, if the equivalent capacitance across terminal x y is 5 F
then the value of C must be ________ F.
Not Attem pt Correct Ans. 21
FAQ? Have any doubt? Solution
Q.14 In the circuit shown below, the value of ‘V ’ is ___________ V.
Q.15 For the circuit shown below
The potential difference between the points P and Q is _________ V.
Not Attem pt Correct Ans. 6
FAQ? Have any doubt? Solution
Q.16 In the circuit shown below
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1432&t=a&testType=2 6/7
1/12/2017 MADE EASY ONLINE TEST SERIES
The total power absorbed by the unknown element is __________ W.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1432&t=a&testType=2 7/7