Professional Documents
Culture Documents
ACCUGRIND-818SP
Typical accuracy
1. Parallelism of upper and lower sides of the
workpiece within 0.000080”(0.002mm)
Conditions:
◆ Material:SAE1045(S45C), HRC45
◆ Workpiece Size:1”x1”(Ø25.4mmx25.4mm)
◆ Grinding Wheel:38A46H(or equivalent)
◆ Dressing Speed:0.04-0.12inch/sec(1-3mm/sec)
◆ Specification of Dressing Diamond:0.5-1.0 carat
◆ Dressing Depth:0.0001”-0.0002”(0.003mm-0.006mm)
◆ Table Speed:33-66fpm(10-20m/mm)
◆ Grinding Depth per Stroke:0.000050”-0.0002”
(0.001mm-0.005mm)
◆ Crossfeed:0.02-0.12”(0.5“mm-3mm)
◆ Room Temperature:20-25°C(68-77°F)
◆ Grinding Wheel Size:ø8”x1/2”xø1 1/4(ø203x12.7xø31.74mm)
1 •
Micro Feed Device
d device utilizes a worm and worm gear for vertical feeds in increments of
µm), the microfeed device is engaged by turning the lever clockwise, which also 2 •
dwheel to prevent any danger caused by accidentally touching the handwheel.
the handwheel can be resumed by turning the lever coumter-clockwise.
3 •
4 •
5
6 •
The column casting is cross ribbed for extra rigidity. The elevating Durable Slideways
guideways of wheelhead and column are hardened and ground.
Machine base slideways are laminated w
The sliding surfaces of the wheelhead are laminated with Turcite-B,
hand scraped. The low friction slidewa
providing accuracy of downfeed and machine longevity.
lubricated, resulting in maximum machine
SP MACHINE CONSTRUCTION 5
7
Table Guideways
8
Table is driven by steel wire and traverses on hardened and ground
guideways with steel ball bearings which have been accurately
• sieved. This provides smooth, accurate, and efficient table
9
movement.
•
10
•
•
11
•
12
PRECISION VISE
B11-0101
2"x3"(50x76mm)
B11-0102
2 1/2"x4"(63x100mm)
B11-0103
3"x4"(76x100mm)
B11-0104
3 1/2"x5"(89x127mm)
B11-0105
4"x5"(100x127mm)
SPLASH GUARD UNIVERSAL WHEEL GUARD RAPID ELEVATION DEVICE ELBE GRINDING WHEEL
(With Nozzle For Coolant System) FOR SIDE FORMING • B39-1102 (For Mirror Surface Grinding)
B19-1101(612SP) B41-1101 Motor:1/4HP(0.19KW) 5915-44211002(81A46-3K9V26)
B19-1102(618SP, 818SP) Suitable for: 8"(203mm) grinding Speed: 8.75ipm(175mm/min)-60HZ 5915-44211005(81A46-3I12V26)
wheel Speed: 7.25ipm(145mm/min)-50HZ
CHUCK CONTROLLER
(With variable holding power
and auto demagnetizer)
• B23-0901
Input: 110VAC
Output: 0-90VDC
COMBINATION COOLANT & COOLANT SYSTEM COOLANT SYSTEM WITH COOLANT SYSTEM WITH MANUAL
DUST EXHAUST UNIT B17-0110 FILTER PAPER FEEDING DEVICE
(With magnetic separator) Volume: 42L, Pump: 1/8HP B17-0901 (With 1 roll of paper)
B17-0106 Coolant Capacity: 20L/min Volume : 95L, Pump : 1/8HP B17-0107
Volume: 34L, Pump: 1/8HP Space: 21"x14 1/4"(530x360mm) Coolant Capacity : 20L/min Volume : 85L, Pump : 1/8HP
Coolant Capacity: 20L/min Heigh:19 7/8” (500mm) Space : 26"x19"(660x480mm) Coolant Capacity : 20L/min
Suction Motor:1/2HP Height : 24"(610mm) Space : 21 21/32"x39 3/8"(550x1000mm)
Separator Capacity: 20L/min Height : 30 1/2"(775mm)
Space: 24 3/4"x31 1/16" (628x790mm)
Height: 26 3/4"(680mm)
COOLANT SYSTEM WITH COMBINATION COOLANT DUST COLLECTOR ADAPTER FOR MOUNTING
MAGNETIC SEPARATOR & DUST EXHAUST UNIT B17-0102 OPTIDRESS E
B17-0105 B17-0101 Suction Motor : 1/2HP,2P B41-1102
Volume:50L, Pump:1/8HP Volume: 34L, Pump: 1/8HP Space : 18 1/2"x19 11/16"
Coolant Capacity:20L/min Coolant Capacity: 20L/min (470x500mm)
Separator Capacity:20L/min Space: 15 3/4"x31 1/16"
Space:25 3/4"x20 1/2"(655x520mm) Height : 23"(585mm)
(398x798mm)
Height:28 3/4"(730mm) Height: 26 3/4"(680mm)
GENERAL SPECIFICATION 8
Description 612SP 618SP 818SP
Table Size 6”x13"(152x330mm) 6”x19"(152x480mm) 8”x19"(203x480mm)
Max. grinding length Longitudinal 14”(355mm) 20”(500mm)
Max. grinding width Crosswise 8”(203mm) 9”(230mm)
Max.distance from table 20”(510mm)
surface to spindle centerline
Standard d magnetic chuck size 5-7/8”x11- 3/4" 5-7/8”x17 -3/4" 7 -7/8”x17- 3/4"
(150x300mm) (150x450mm) (200x450mm)
Per revolution 0.2”(5mm)
Crosswise
Per graduation 0.001”(0.02mm)
movement of table
Micro Feed 0.000050”(0.001mm) (Optional)
Diameter 8”(203mm)
Standard grinding
wheel Width 1/2”(12.7mm) , max 1”(25.4mm) (Optional)
Bore 1 1/4”(31.75mm)
※ Note: The manufacturer reserves the right to modify the design, specifications, mechanisms... etc. of the machine without prior notice.
All the specifications shown above are just for reference.
A 69”(1750mm) 80”(2040mm)
L B 27”(685mm)
M
J C 73 3/4”(1870mm)
D K
H
G D 53 1/2”(1360mm)
F E 1/2”(12.7mm)
F 10 1/2”(267mm)
A
G 0.433”(11mm)
H 6”(152mm) 8”(200mm)
I 8 7/8”(225mm) 10”(254mm)
J 9 5/8”(244mm) 9 1/2”(242mm)
C
K 20”(510mm)
L 8”(203mm)
M 2”(50mm)
※ Note: The manufacturer reserves the right to modify the design, specifications, mechanisms... etc. of the machine without prior notice.
All the specifications shown above are just for reference.
STD. ACCESSORIES
15 14
Molecular Decomposition
Manual Grinders CNC Profile Grinders Automatic Grinders Process (MDP) Grinder VMC (Various Sizes) VMC w. turntable Slant Bad CNC Lathes Teach-in Lathes
U.S.A. OFFICE
No. 34, Hsing Kong Road, Shang Kang, Chang Hua 9925 Tabor Place, Santa Fe Springs, CA 90670 U.S.A
TAIWAN 509 TEL:(562)903-1929
TEL: 886-4-7991126 FAX: 886-4-7980011 FAX:(562)903-3959
http://www.chevalier.com.tw
E-mail: overseas@chevalier.com.tw
TA-YA Factory TEL:886-4-25673266